Enhanced TDS
Identification & Functionality
- Additives Included
- Blend
- Yes
- Chemical Family
- Plastics & Elastomers Functions
- Polymer Name
- Product Code
- MITM16467
- Single Ingredient
- No
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Product Features and Benefits
- Easy processability
- Very good mechanical properties
- High abrasion resistance
- Stable modulus with moist
- Environment
- Remarkable physical resistance
- Lightest engineering
- Polymers
- Low water absorption
- Very good chemical resistance
- High aging resistance
- Wide range of temperature
Applications & Uses
- Plastics & Elastomers Processing Methods
- Processing Information
Machine General All extruders suitable for polyamides can run the Agimid® 241 B120-S Screw Types Screws with three zones (feeding, compression, and metering zones) are recommended. Length: 18 D - 22 D
Material Drying Agimid® 241 B120-S is dried and packed with a moisture content of less than 0.10%. If packaging is damaged or left open for >2 hours, the material must be dried. Polyamides are sensitive to oxidation at temperatures > 80°C in oxygen atmosphere
Drying Settings - Air Dryer
- Temperature: max. 80°C
- Time: 4 - 8 hours
- Vacuum Dryer
- Temperature: max. 80°C
- Time: 2 - 4 hours
Drying Settings Lubrication Agimid® 241 B120-S includes internal lubricants. Zinc Stearate or Calcium Stearate can be helpful in case of process instability
Process (Recommended Basic Settings) Basic Machine Settings - Hopper zone: 60 - 90°C
- Feeding zone: 200 - 225°C
- Compression zone: 210 - 240°C
- Metering zone: 210 - 240°C
- Head: 200 - 230°C
- Melt: 205 - 235°C
Cooling Bath 15 - 30°C - Air Dryer
Properties
Principal Information
- Group Principal Number
- S000003
- Principal
Storage & Handling
- Storage Conditions
Agimid® 241 B120-S must be stored in dry, indoor, and safe facilities. Granules should be run at workshop temperature to prevent moisture condensing. Expiry date: Two years from delivery date
Other
- Appearance (SDS)
- Solid black granules
- Color (SDS)
- Black
- Explosive Nature (SDS)
- Non explosive
- Flammable Nature (SDS)
- Non explosive
- Item Number
- Odor (SDS)
- Light
- Other Hazards
- PBT: Not applicable vPvB: Not applicable
- Temperature Control
- Yes
- USA/DOT UN Number
- Not Applicable
- Electrical Properties
Value Units Test Method / Conditions Dielectric Strength 24.0 kV/mm kV/mm ASTM D149 as dry state - Mechanical Properties
Value Units Test Method / Conditions Elongation at Break min. 100.0 % % ISO 527 Tensile Modulus 400.0 MPa MPa ISO 527 Tensile Strength at Break 37.0 MPa MPa ISO 527 - Physical Properties
Value Units Test Method / Conditions Density 1.02 g/cm³ g/cm³ ISO 1183 at 23°C Melting Point 173.0 °C °C ISO 11357-1 Storage Temperature max. 140.0 °F °F Water Absorption 1.4 % % Internal Method at 23°C, with 100% relative humidity Water Absorption 0.7 % % Internal Method at 23°C, with 50% relative humidity - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) 314.0 °C °C At 1013 Hpa Flash Point (SDS) min. 200.0 °C °C Closed Cup Log Partition Coefficient (Log Pow) (SDS) 2.05 - Log Pow Melting Point (SDS) 168.0-178.0 °C °C Relative Density (SDS) 1.15 - at 20°C Relative Vapor Density (SDS) 0.0397 - at 20°C Viscosity (SDS) 180.0 mPa.s mPa.s At 20°C pH (SDS) 7.5-8.5 - - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 0.0 d d - Thermal Properties
Value Units Test Method / Conditions Heat Deflection Temperature 95.0 °C °C ISO 75 at 0.45 MPa Heat Deflection Temperature 45.0 °C °C ISO 75 at 1.85 MPa