Enhanced TDS
Identification & Functionality
- CASE Ingredients Functions
- Chemical Family
- Function
- Curing Agent
- Product Code
- MITM15193
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Labeling Claims
- Key Features
Epoxy coating systems cured with AP 5601 present the following features.
- Suitable for ambient temperature cure.
- Provides excellent adhesion to sandblasted steel and corrosion protection.
- Benzyl alcohol and nonyl phenol free.
- Good adhesion to marginally prepared surfaces.
- Resistance to aqueous alkaline, acid and saline solutions.
- Good corrosion resistance.
Applications & Uses
- Coating End Applications
- Compatible Polymers & Resins
- Compatible Substrates & Surfaces
- Product Applications
- AP 5601 is used in combination with liquid Epoxy resins or epoxy resin modified by means of reactive as well as non-reactive diluents.
- Can be used in combination with polyamides, polyamines or other hardeners for suitable applications in protective coating, concrete etc.
Properties
- Physical Form
Principal Information
- Group Principal Number
- S001795
- Principal
Storage & Handling
- Storage Conditions
- AP 5601 should be stored in a dry place, preferably in the sealed original container at temperatures 15 to 30°C. The Product should not be stored exposed to direct sunlight.
- Material may crystallize upon exposure to low temperature can be utilized after making it clear by heating the material. It is recommended that the material be heated to 50 - 70°C with continuously mixing for 1 hour.
- Once the material becomes fully homogenized, it can be cooled to room temperature and utilized under normal conditions.
Shelf life: (15 to 30 °C): 12 Months.
Hazardous decomposition products: (When in fire) Carbon monoxide, Carbon dioxide, Nitrogen Oxides and other toxic Gases & Vapors.
Handling Precautions:
- The hardener will absorb moisture and carbon dioxide when left in open containers. This may result in increased viscosity and sometimes crystallization.
- Use personal protective equipments and follow industrial hygienic procedures. Recommended to use safety glasses, protective clothing, gloves, & masks suitable for chemical, solvents & their vapor.
Other
- Appearance
- Clear amber colored liquid
- Appearance (SDS)
- Clear
- Color (SDS)
- Amber
- IATA/ICAO Proper Shipping Name
- Amines, liquid, corrosive, N.O.S.
- IATA/ICAO UN Number
- UN2735
- IMO/IMDG EmS Fire
- F-A
- IMO/IMDG EmS Spill
- S-B
- IMO/IMDG Proper Shipping Name
- Amines, liquid, corrosive, N.O.S.
- IMO/IMDG Segregation Group
- SGG18, SG35
- IMO/IMDG UN Number
- UN2735
- Insoluble in (SDS)
- Water
- Odor
- Amine
- Odor (SDS)
- Amine - like
- TDG Canada Emergency Response Guide Number
- 153
- TDG Canada Proper Shipping Name
- Amines, liquid, corrosive, N.O.S.
- TDG Canada UN Number
- UN2735
- USA/DOT Emergency Response Guide Number
- 153
- USA/DOT Proper Shipping Name
- Amines, liquid, corrosive, N.O.S.
- USA/DOT UN Number
- UN2735
- Optical Properties
Value Units Test Method / Conditions Color Scale max. 15.0 Gardner Gardner ASTM D1544 - Chemical Properties
Value Units Test Method / Conditions Amine Value 290.0-350.0 mg KOH/g mg KOH/g ISO 9702 - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 12.0 mo mo - Physical Properties
Value Units Test Method / Conditions Density 0.94-0.98 kg/L kg/L ASTM D1475 at 25°C Dry to Set Time 9.0-12.0 hr hr BK Dry Time Recorder at 25°C Gel Time 60.0-100.0 m m at 25°C Viscosity 900.0-1900.0 mPa.s mPa.s DIN 53015 at 25°C Viscosity 900.0-1900.0 mPa.s mPa.s ISO 12058 at 25°C - Application Information
Value Units Test Method / Conditions Mix Ratio 62.5 pbw pbw Epikote 828, GY 250 - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Density (SDS) 0.94-0.98 g/cm³ g/cm³ ASTM D1475 at 25°C Flash Point (SDS) min. 120.0 °C °C Viscosity (SDS) 900.0-1900.0 mPa.s mPa.s ISO 12058 at 25°C