Enhanced TDS
Identification & Functionality
- CASE Ingredients Functions
- Chemical Family
- Function
- Hardener, Accelerator
- Industrial Additives Functions
- Product Code
- MITM16325
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Industrial Additives Features
- Key Features
Epoxy coating systems cured with AP4406L present the following features:
- Suitable for ambient and low temperature cure, down to 5°C
- Very rapid cure
- Very low viscosity and high gloss blush free film appearance
Applications & Uses
- Adhesive & Sealant End Applications
- Applicable Processes
- Coating End Applications
- Industrial Additives End Use
- Product Applications
- It is used in combination with liquid epoxy resins and with other suitable epoxy for solvent free epoxy systems.
- It is mainly used where rapid thin film cure or low temperature curing required.
- It is used for fast setting epoxy adhesives, patching compounds, crack injection and high solid coatings.
- It can also be used to accelerate other amine based curing agent.
Properties
- Physical Form
Safety & Health
- Safety Information
- The hardener will absorb moisture and carbon dioxide when left in open containers.
- This may result in increased viscosity and sometimes crystallization.
- Use personal protective equipments and follow industrial hygienic procedures.
- Recommended to use safety glasses, protective clothing, gloves, & masks suitable for chemical, solvents & their vapor.
Storage & Handling
- Storage Conditions
- AP 4406L should be stored in a dry place, preferably in the sealed original container at temperatures 15 to 30°C.
- The Product should not be stored exposed to direct sunlight.
- Shelf life: (15 to 30°C): 12 Months
- Hazardous decomposition products: (When in fire) Carbon monoxide, Carbon dioxide, Nitrogen Oxides and other toxic Gases & Vapors.
Other
- Amine Value
- 380.0-420.0 mg KOH/g
- Appearance
- Clear yellow colored liquid
- Appearance (SDS)
- Clear
- Color (SDS)
- Yellow
- Color Scale
- max. 5.0 Gardner
- Color Scale
- max. 5.0 ASTM
- Density
- 0.96-0.98 kg/L
- Density (SDS)
- 0.96-0.98 g/cm³
- Flash Point (SDS)
- min. 93.0 °C
- Gel Time
- 8.0-15.0 m
- Group Principal Number
- S001795
- IATA/ICAO Emergency Response Guide
- 8L
- IATA/ICAO Proper Shipping Name
- Amines, liquid, corrosive, N.O.S. (4- tert-butylphenol ; phenol, 4-nonyl-, branched ; 1,3- benzenedimethanamine ; 1,5- pentanediamine, 2-methyl)
- IATA/ICAO UN Number
- UN2735
- IMO/IMDG EmS Fire
- F-A
- IMO/IMDG EmS Spill
- S-B
- IMO/IMDG Proper Shipping Name
- Amines, liquid, corrosive, N.O.S. (4- tert-butylphenol ; phenol, 4-nonyl-, branched ; 1,3- benzenedimethanamine ; 1,5- pentanediamine, 2-methyl)
- IMO/IMDG Segregation Group
- SGG18, SG35
- IMO/IMDG UN Number
- UN2735
- Insoluble in (SDS)
- Water
- Item Number
- Odor
- Amine
- Odor (SDS)
- Characteristic
- Principal
- Set Time
- 1.5-2.0 hr
- Set Time
- 5.0 hr
- Shelf Life
- 12.0 mo
- Storage Temperature
- 59.0-86.0 °F
- TDG Canada Emergency Response Guide Number
- 153
- TDG Canada Proper Shipping Name
- Amines, liquid, corrosive, N.O.S. (4- tert-butylphenol ; phenol, 4-nonyl-, branched ; 1,3- benzenedimethanamine ; 1,5- pentanediamine, 2-methyl)
- TDG Canada UN Number
- UN2735
- USA/DOT Proper Shipping Name
- Amines, liquid, corrosive, N.O.S. (4- tert-butylphenol ; phenol, 4-nonyl-, branched ; 1,3- benzenedimethanamine ; 1,5- pentanediamine, 2-methyl)
- USA/DOT UN Number
- UN2735
- Viscosity
- 80.0-150.0 mPa.s
- Viscosity
- 80.0-150.0 mPa.s
- Viscosity (SDS)
- 50.0-150.0 mPa.s
- Optical Properties
Value Units Test Method / Conditions Color Scale max. 5.0 Gardner Gardner Color Scale max. 5.0 ASTM ASTM ASTM D1544 - Chemical Properties
Value Units Test Method / Conditions Amine Value 380.0-420.0 mg KOH/g mg KOH/g ISO 9702 - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 12.0 mo mo - Physical Properties
Value Units Test Method / Conditions Density 0.96-0.98 kg/L kg/L ASTM D1475 at 25°C Gel Time 8.0-15.0 m m at 25°C, 150g Set Time 1.5-2.0 hr hr at 25°C, 8 mils, 200 microns WFT Set Time 5.0 hr hr at 5°C, 8 mils, 200 microns WFT Storage Temperature 59.0-86.0 °F °F Viscosity 80.0-150.0 mPa.s mPa.s DIN 53015 at 25°C Viscosity 80.0-150.0 mPa.s mPa.s ISO 12058 at 25°C - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Density (SDS) 0.96-0.98 g/cm³ g/cm³ ASTM D1475 at 25°C Flash Point (SDS) min. 93.0 °C °C Viscosity (SDS) 50.0-150.0 mPa.s mPa.s ISO 12058 at 25°C