Products

EBECRYL® 3603 is an epoxy novolac acrylate diluted 20% by weight with the reactive diluent tripropylene glycol diacrylate (TPGDA) . EBECRYL 3603 exhibits rapid cure upon exposure to ultraviolet light (UV) or electron beam (EB) and superior chemical and thermal resistance.

TEGO® DISPers 747 W is an anionic wetting and dispersing additive for water borne architectural formulations. Wets and stabilizes iron oxides with very effective viscosity reduction.Enables high pigment loadings with inorganic pigments and is able to stabilize organic pigments. As a dispersant in base paints, it shows excellent color acceptance.

KRONOS® 2064 is used for Printing Inks for maximum gloss and hiding power.

VANCRYL® 960 is a very low glass transition temperature acrylic polymer for film printing applications in the graphic arts industry. Inks made from this polymer exhibit excellent gloss, adhesion to polyolefins, ice water crinkle resistance, and fine printing characteristics. These properties are needed when converting packaging printing from solvent-based formulations to water-based formulations. VANCRYL® 960 is compatible with VANCRYL® 68 pigment dispersions as well as other commonly used dispersion resins. It also exhibits excellent compatibility with additives such as surfactants, adhesion promoters, and waxes. VANCRYL® 960 can be used as the backbone of printing inks and overprint coatings where various COF or slide angle requirements are needed, from a range of 0.25 to 0.45.

EBECRYL® 3420 is a low viscosity, modified epoxy acrylate with good pigment wetting ability. In UV offset, the final ink produced with this resin exhibits an enhanced ink water balance and good misting. EBECRYL® 3420 can be used to produce a UV flexo ink with good flow, high gloss and high reactivity.

TEGO® DISPers 650 is a non-ionic wetting and dispersing additive that can be used in waterborne and solventborne formulations and in universal colorants. Especially for organic pigments;providesexcellent color strength development.

EBECRYL® 85 is a low viscosity amine modified polyether acrylate that provides high reactivity in low extractable, low odor energy curable coatings and inks. Coatings and inks based on EBECRYL® 85 exhibit a low odor after UV or EB curing.

RHOPLEX® SG-10AF is a versatile 100% copolymer that was designed for use in high-quality interior/exterior semigloss paints. RHOPLEX® SG-10AF provides paint formulators with an opportunity to achieve excellent early and ultimate block resistance, and very good flow and leveling. RHOPLEX® SG-10AF establishes a new level of performance for aqueous semigloss applications.

TEGO® VariPlus DS 50 strongly improves the mechanical properties of waterborne inks and coatings. It also improves resistance against water, solvents, and chemicals. It leads to excellent adhesion on plastics and improves intercoat adhesion.

RHOPLEX® HG-700 is an aqueous, 100% acrylic polymer designed for interior and exterior, VOC compliant, gloss and semigloss enamels. This binder uses ambient temperature self-crosslinking technology to offer improved enamel performance versus conventional latex polymers. The combination of an all-acrylic backbone and ambient cure crosslinking technology offers excellent performance in gloss and semi-gloss formulations at VOC levels under 150 g/L. Gloss enamels based on RHOPLEX® HG-700 offer durable coatings with excellent adhesion, block resistance, and stain removal. Suitable applications include factory applied topcoats for wood and wood composite materials such as joinery and siding products.

AP 5980L is a low viscosity modified cyclo-aliphatic amine adducts hardener for epoxy resin based coatings. It exhibits high chemical resistance.

EBECRYL® 3701 is a modified bisphenol A epoxy diacrylate. EBECRYL® 3701 imparts flexibility and toughness to ultraviolet light (UV) or electron beam (EB) cured coatings and inks while maintaining such desirable properties as fast cure response and superior chemical resistance that are typical of standard epoxy acrylates.

RHOPLEX® MV-23LO is an aqueous, all-acrylic binder designed for interior and exterior wood primers and stain-blocking sealers. It is a versatile vehicle that can be used in both the formulation of primers that upgrade difficult substrates into sound repaint surfaces, and stain blocking sealers that minimize the "bleed through" of wood tannins and common household stains.

EBECRYL® 1290 is a hexafunctional aliphatic urethane acrylate that exhibits very fast cure response when exposed to ultraviolet light (UV) or electron beam (EB). Cured films of EBECRYL® 1290 demonstrate outstanding hardness, scratch and abrasion resistance, chemical resistance, and are resistant to yellowing.

CRAYVALLAC® EXTRA is a high performance, micronised amide wax rheology modifier suitable for high-solids and solvent-free applications with very high robustness. It is especially recommended in 2K epoxy primers for its high temperature tolerance.CRAYVALLAC® EXTRA overcomes those difficulties which exist with hydrogenated castor oil based rheology modifiers e.g. seeding and false-body and that were maximised when activation was performed at high temperatures.