Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Chemical Name
- Function
- Thickener
- Product Code
- MITM16400
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
Applications & Uses
- Coating End Applications
- Product Applications
- Bermocoll® EBS 481 FQ is used in latex paints for thickening and stabilizing effects, particularly when high storage viscosity combined with low application viscosity is required.
- Normal dosage is 0.2 - 0.7 % calculated on the total paint weight.
- Bermocoll® EBS 481 FQ is easily dispersed in cold water of pH 7 or less.
- Bermocoll® EBS 481 FQ can form lumps when added to an alkaline liquid. To avoid this, it should be added as a ready stock solution, as a slurry in slight acid water or in an organic solvent, or as a dry mix with other powder materials.The dissolving time after dispersion is influenced by the water pH. Alkaline additives can be used to speed up the dissolving process.
Properties
- Physical Form
- Soluble In
- Note
Bermocoll® EBS 481 FQ is a high viscosity grade of ethyl hydroxyethyl cellulose.
Packaging & Availability
- Packaging Type
- Packaging Information
- Like many industrial processed powdery materials, cellulose ether dusts are combustible and can cause dust explosions.
- Dust formation must be avoided or kept to a minimum.
- Care should be taken to prevent ignition from heat, spark, open flames or hot surface.
- Bermocoll® EBS 481 FQ is packed in Polyethylene bags.
- Net weight 20 kg.
- We recommend emptying the bags from the bottom.
- The empty bags can be recycled or burned.
Storage & Handling
- Storage Conditions
- In unopened bags, Bermocoll® EBS 481 FQ can be stored for several years.
- In opened bags, the moisture content of Bermocoll® EBS 481 FQ will be influenced by the air humidity.
- At the temperatures above 250 °C (480 °F), charring of Bermocoll® EBS 481 FQ will occur.
Other
- Appearance
- Whitish powder
- Appearance (SDS)
- Powder
- Color (SDS)
- Off - white
- Dust Explosion Class (SDS)
- ST1
- Flammable Nature (SDS)
- Combustible solids
- Group Principal Number
- S003175
- Item Number
- Odor (SDS)
- Odorless
- Other Hazards
- Dust can form an explosive mixture in air.
- Oxidizing Properties (SDS)
- Not oxidizing
- Principal
- Chemical Properties
Value Units Test Method / Conditions pH 5.0-7.0 - 1% solution - Physical Properties
Value Units Test Method / Conditions Sieve Fractionation (Retained) 98.0 % % +500 µm Mesh Sieve Fractionation (Through) 98.0 % % - 500 microns Mesh Viscosity 4000.0-6000.0 mPa.s mPa.s Brookfield Viscometer at 20°C, 1% solution - Material Composition
Value Units Test Method / Conditions Salt Content max. 5.0 % % - Application Information
Value Units Test Method / Conditions Dosage (Use Level) 0.2-0.7 % % - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Autoignition Temperature (SDS) 248.0 °F °F DIN EN 15188 Autoignition Temperature (SDS) min. 842.0 °F °F EN 50281 auto-ignition of a 5mm dust layer Autoignition Temperature (SDS) min. 788.0 °F °F EN 50281 auto-ignition of a dust cloud Burning Number (SDS) 5.0 - Deflagration Index (SDS) max. 200.0 bar.m/s bar.m/s Flammable Limits (SDS) 30.0 g/m³ g/m³ Ignition Energy (SDS) min. 10.0 MJ MJ Viscosity (SDS) 4000.0-6000.0 mPa.s mPa.s at 20°C, pH 7 at 1% solution pH (SDS) max. 6.5 -