Products

FH-173 is a kind of easily dispersed self-activating organoclay, which is a rheology modifier for esters, ketones, alcohols and ethers and other medium-high polarity solvents, paints and inks containing some aromatic solvents.It can be directly dispersed without an activator in xylene-esters (e.g., butyl acetate), xylene-ketones (e.g., cyclohexanone), and xylene-butanol, etc. in medium-high polarity solvent systems.

Bermocoll® Prime 1000 is a non-ionic, water soluble cellulose ether with enhanced enzymatic resistance. and superior color stability. It improves the consistency, the stability, and the water retention of water based paints.

AEROSIL® COK 84 is a formulated product with highly dispersed fumed aluminium oxidein the ratio of 5:1.

HFGEL 120-N is an organophilic clay optimized for use primarily in aliphatic and other non-polar to medium polarity solvent-based systems. HFGEL 120-N belongs to the newest generation of high performance organoclays, being easy to disperse and self-activating. It can be added at any point in the manufacturing process and can be used to correct finished batches. HFGEL 120-N imparts viscosity increase, sag control and prevents settling of pigments and fillers.

CRAYVALLAC® ULTRA is a pure polyamide especially recommended in 2K epoxy primers for its robustness. CRAYVALLAC® ULTRA is a micronised amide wax rheology modifier offering very good recoatability for ambient curing solvent-based epoxy coatings. CRAYVALLAC® ULTRA has been designed to overcome those difficulties which exist with older type organo-wax rheology modifiers e.g. seeding, false-body and migration of readily dissolved species to the surface. Consequently, when used in strong solvent systems, coatings formulated using CRAYVALLAC® ULTRA offer an enhanced performance and very good recoatability.

CRAYVALLAC® 60P is a solid powder wax consisting of fine particles of oxidized polyethylene recommended to prevent irreversible hard settling. The fine nature of this dispersion means that CRAYVALLAC® 60P is easily incorporated and activated in coating systems. It is mainly used in industrial and maintenance coatings where its primary function is to provide pigment suspension without any increase in the apparent viscosity. CRAYVALLAC® 60P can generally be used in most solvent-based formulations. Typical applications are epoxy primers, vinyl primers, anti-fouling paints, road marking paints and chlorinated rubber coatings.

HFGEL 120-C is an organophilic clay designed for use in medium to high polarity systems. HFGEL 120-C imparts excellent rheology, particle suspension, and pigment anti-settling.

AERODISP® WF 7620 is an aqueous 20% dispersion of a functionalized fumed aerosil

HFGEL 120-OG is is easy to disperse and suitable for lubricating greases based on recovered oil,mineral oil with low kinematic viscosity, partial synthetic oils and other organic fluids.

AEROSIL® E 972 is a fumed silica after-treated with DDS (dimethyldichlorosilane). It is an efficient rheology modifier suitable for a wide range of applications and is very easy to disperse.

BS-1C-0 is an organically modified bentonite designed for use in low to medium polarity solvent system.

AEROSIL® R 812 is a fumed silica after-treated with organosilane (HDMDS) with high specific surface and marked hydrophobia.

HFGEL 120-X is an organoclay for solvent-based systems of low to medium polarity.

CRAYVALLAC® REV is a new high performance micronised amide wax rheology modifier offering perfect recoatability for regular, high solids and solvent-free coatings. CRAYVALLAC® REV has been designed to provide reliability and efficiency in a wide range of coatings. As other CRAYVALLAC® modifiers, it overcomes technical constraints such as seeding, false-body and migration of readily dissolved species to the surface. Even used in strong solvent systems, coatings formulated using CRAYVALLAC® REV offer an enhanced performance and very good recoatability.

HFGEL 120-V10 is an organophilic clay for a broad range of polarity organic liquid systems. Belonging to the newest generation of high performing organoclays, it is easy to disperse and does not require a chemical activator in many systems. HFGEL 120-V10 can be added at any point in the manufacturing process.