Enhanced TDS
Identification & Functionality
- Blend
- No
- Chemical Family
- Chemical Name
- Industrial Additives Functions
- Product Code
- MITM16799
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- Industrial Additives Features
- Labeling Claims
Applications & Uses
- Industrial Additives End Use
- Markets
- Applications
- Product Applications
Bermocoll® MT 500 is used in high quality tile adhesives to improve the workability, consistency, slip resistance, skin formation, open time, water retention and adhesion.
Properties
- Physical Form
- Soluble In
Safety & Health
- Safety Information
Bermocoll® MT 500 is intended for dry mixing with other powder materials and should not be used for direct dissolving in water. At the temperatures above 250 °C (480 °F), charring of Bermocoll® MT 500 will occur. At high temperatures and in contact with an open flame, Bermocoll® MT 500 will burn slowly with the characteristics of cellulose.
Principal Information
- Group Principal Number
- S003175
- Principal
Storage & Handling
- Storage Conditions
In unopened bags, Bermocoll® MT 500 can be stored for several years. In opened bags, the moisture content of Bermocoll® MT 500 will be influenced by the air humidity.
Other
- Appearance
- Whitish powder
- Appearance (SDS)
- Powder
- Color (SDS)
- White
- Dust Explosion Class (SDS)
- St2
- Flammability (SDS)
- Combustible solids, may form combustible dust concentrations in air
- Odor (SDS)
- Odorless
- Oxidizing Properties (SDS)
- Not oxidizing
- Protect from Freezing
- No
- Temperature Control
- No
- USA/DOT UN Number
- Not Applicable
- Chemical Properties
Value Units Test Method / Conditions pH 6.0-8.0 - 1% Solution - Physical Properties
Value Units Test Method / Conditions Sieve Fractionation (Through) 98.0 % % 600 μm opening Viscosity 3000.0-6000.0 mPa.s mPa.s Brookfield LV Viscometer at 20°C, 2% solution - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Bulk Density (SDS) 300.0-400.0 kg/m³ kg/m³ Decomposition Temperature (SDS) min. 100.0 °C °C Deflagration Index (SDS) 200.0-300.0 bar.m/s bar.m/s Kst Lower Explosion Limit (SDS) 30000.0 mg/m³ mg/m³ pH (SDS) 7.0 - 0.5% solution