Products

BONDERITE® S-FN 213 ACHESON is designed to provide controlled electrical resistance properties. BONDERITE® S-FN 213 ACHESON is a dispersion of finely divided graphite pigment in an epoxy resin solution. When properly cured, it has excellent adhesion to epoxy circuit boards, bushings, plastics and ceramics. BONDERITE® S-FN 213 ACHESON also has excellent wearing properties. It provides chemical resistance to oils and many solvents, but not to enamel strippers. BONDERITE® S-FN 213 ACHESON as a lubricant coating provides clean, dry, long-wearing, and superior maintenance-free lubrication for a wide range of light to medium load applications. A thin film of BONDERITE® S-FN 213 ACHESON keeps wear uniform and reduces friction on mating metal parts without requiring increased manufacturing tolerances. Components are protected from metal-to-metal contact even in applications approaching boundary lubrication, reducing the risk of damage due to partial or complete seizure. Formulated from processed micro-graphite and epoxy resin, BONDERITE® S-FN 213 ACHESON forms tightly adherent coatings on many types of substrates. In addition to high lubricity, BONDERITE® S-FN 213 ACHESON coatings exhibit extremely good wear resistance to oils and solvents (except enamel strippers).

PARALOID™ B-66 100% Resin thermoplastic acrylic resin is an excellent general-purpose resin with the same characteristics as the solution grade. In appropriate solvents, PARALOID™ B-66 100% Resin acrylic resin forms clear solutions, which air-dry extremely fast to form hard, colorless films which display excellent block resistance and color retention.

D.E.H.® 80 is a phenolic hardener based on an unmodified solid reaction product of liquid epoxy resin and bisphenol A containing a polyacrylate flow modifier and about 0.7% of a curing accelerator.

Dynasylan® SIVO 250 is a methacrylfunctional silane that can be used as adhesion promoter, surface modifier, co-monomer for polymer synthesis and crosslinker. Dynasylan® SIVO 250 is a clear, colorless liquid. It is soluble in alcohols, and aliphatic or aromatic hydrocarbons.

SURFONIC® L24-9 the nine-mole ethoxylate of linear, primary 12-14 carbon number alcohol. It is a water-soluble, nonionic surface active agent which is compatible with other nonionic surfactants and with most anionic and cationic surfactants. The product is a milky white semi-solid at room temperature.

Orient Black® N660 is a low surface area, medium structure general purpose soft grade carbon black which provides medium reinforcement and excellent workability.

Bermocoll® M 10 is a non-ionic, water soluble cellulose ether intended as a water retaining and consistency improving additive to cement based mortars. Bermocoll® M 10 contains methyl, ethyl and hydroxyethyl substitution giving a unique balance between workability and strength.

SURFYNOL® 485 W is a low-viscosity substrate wetting agent for water borne coatings and inks with high solubility in aqueous systems. SURFYNOL® 485 W can also be used for its stabilization and emulsification properties

Orient Black® N550 is a low surface area and high structure fast extruding soft grade carbon black offering moderate resilience.

Bluesil™ RES 6407 is a 70% solids methylphenylsilicone resin in Toluene solution. This resin is designed to formulate heat resistant coatings for industrial applications with improved weatherability.

Lobase® C4503 is a 30 TBN oil soluble neutral calcium sulfonate. It is a general purpose neutral calcium sulfonate typically used as a detergent and rust inhibitor in crankcase lubricants. It is compatible with most mineral base oils, white oils, and synthetic base stocks.