Enhanced TDS
Identification & Functionality
- Chemical Family
- Function
- Water Repellent
- Industrial Additives Functions
- Product Code
- MITM12712
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Compatible Substrates & Surfaces
- Industrial Additives End Use
- Markets
- Applications
- Application and Usage Information
- Product Application:
- Water repellent treatment of plaster used to produce tiles and boards.
- Water repellent treatment of dry-sprayed substances (e.g.: extinguisher powders, various fillers).
- Usage Information:
- Water repellent treatment of plaster Bluesil™ WR 68 is added to the water to be mixed with the plaster preparation. Good water repellent properties are obtained by adding 0.2 to 0.5 % Bluesil™ WR 68 relative to the plaster powder. The quantity of water repellent varies according to the grade of plaster and the plaster-water mixing ratio. Adding Bluesil™ WR 68 to the plaster enables water absorption to be limited to values less than those set in current European standards.
- Treating fillers In this case Bluesil™ WR 68 is used on its own, or for example with 3 % of glycol tetraoctylene titanate. Polymerisation takes place at room temperature. It may be accelerated by heating for a few minutes at . Comments: Do not bring near potash or caustic soda or any other alkaline compound. There is a risk of a violent release of highly inflammable products. Similarly, do not use in the presence of alcohols (or solvents containing a significant proportion of them) or other components containing reactive hydrogen atoms (SH, OH…) since hydrogen release may again occur.
- Product Application:
Properties
- Physical Form
Regulatory & Compliance
- Contains any chemicals listed on Prop 65 (including impurities, residues, catalysts, monomers, and by-products and excluding heavy metals)?
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S002177
- Principal
Storage & Handling
- Storage and Shelf Life Information
- When stored in its original packaging, Bluesil™ WR 68 may be stored at a temperature between -20 and 30°C for up to 18 months from its date of manufacturing.
Other
- Appearance
- Clear liquid
- Color (SDS)
- Colorless
- Insoluble in (SDS)
- Water
- Item Number
- Miscible in (SDS)
- Ethanol
- Odor (SDS)
- Faint
- Other Hazards
- Chemical compounds containing silicon - hydrogen bonds (SiH). This product may generate hydrogen gas. For further information, refer to section 10: "Stability and Reactivity".
- Oxidizing Properties (SDS)
- Not oxidizing
- USA/DOT UN Number
- Not Applicable
- Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 18.0 mo - Physical Properties
Value Units Test Method / Conditions Flash Point 110.0 °C Closed Cup Specific Gravity 1.0 - at 25°C Viscosity 25.0 mm²/s At 25°C - Material Composition
Value Units Test Method / Conditions Active Content 100.0 % - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Autoignition Temperature (SDS) 932.0 °F hydrogen Flash Point (SDS) 266.0-293.0 °F Closed Cup Lower Flammable Limit (SDS) 4.0 %(V/V) Hydrogen Specific Gravity (SDS) 0.99 - at 20°C Upper Flammable Limit (SDS) 74.0 %(V/V) hydrogen Vapor Pressure (SDS) max. 0.1 hPa at 20°C Viscosity (SDS) 25.0 mm²/s at 25°C