Products

Exolit® AP 428 is a fine-particle ammonium polyphosphate produced by a special method. The product is largely insoluble in water and completely insoluble in organic solvents. It is colorless, non-hygroscopic and non-flammable. Exolit® AP 428 differs from most other commercial products in the following ways, greatly reduced solubility in water lower viscosity in aqueous suspensions, lower viscosity in PU polyol suspensions.

CYMEL® 243-3 Resin is a partially n-butylated melamine-formaldehyde crosslinking agent supplied in high flash aromatic solvent. It has excellent compatibility and is recommended for thermosetting acrylic and alkyd topcoat finishes and metal decorating systems. Its high resistivity provides wide latitude in formulating electrostatic spray finishes.

CYMEL® MB-98 resin is a butylated melamine crosslinker with high degree of alkylation and very low free formaldehyde. It has been specially designed to improve the resistance properties of urea-based acid curing wood coating formulations.

TRIGLYCIDYL ISOCYANURATE (TGIC) JF-77 is an isocyanurate based crystalline polyepoxide compound, its molecular weight is 297(CAS Number:2451-62-9), it owns good heat resistance, weather resistance, adhesive and high temperature performance.

RG-578633 Transparent Red Oxide provides liquid colorants that are low in viscosity, high in color strength, and maintain excellent stability. Possible applications for the RG line include but are not limited to truck bed liners, industrial floor coatings, agricultural coatings and athletic surfaces. RG is compatible in numerous resins such as epoxy, polyester and polyaspartic.

CYMEL® 247-10 resin is a partially n-butylated melamine-formaldehyde crosslinking agent characterized by a superior degree of compatibility with most backbone polymers, as implied by its very high hydrocarbon tolerance value. CYMEL® 247-10 resin is suitable for industrial baking enamels requiring good flow, high gloss and superior resistance properties. CYMEL® 247-10 resin is also useful as a leveling agent in coil coating and metal decoration formulations to improve flow, wetting and gloss.

CYMEL® UI-20-E Resin is a partially iso-butylated urea crosslinker designed for use in acid curing wood coatings with high film build requirements. Being supplied in ethanol, films dry very quickly resulting in coatings with excellent early block resistance.

Exolit® OP 950 is a white granular powder based on an organic phosphinate. The product is not hygroscopic and slightly soluble both in water and in common organic solvents. It melts at 200°C.

CYMEL® UM-15 resin is a highly methylated urea crosslinker supplied as a liquid at >96% solids. Its high solids combined with very fast cure makes CYMEL® UM-15 resin suitable in high solids, low temperature curing systems, like wood and paper coatings. CYMEL® UM-15 is hydrophilic in nature, completely water soluble, and has very good compatibility with water soluble anionic backbone polymers. This makes CYMEL® UM-15 resin suitable for waterborne applications, like paper and wood coatings, where speed of cure is very important.

EBECRYL® 7100 is an acrylated amine primarily used as a hydrogen donor, or photoactivator, in ultraviolet light (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. benzophenone), EBECRYL® 7100 provides rapid UV cure response in air by mitigating the effects of oxygen inhibition at the coating or ink surface. Unlike conventional tertiary amines such as N-methyldiethanolamine, EBECRYL® 7100 reacts to become part of the UV cured polymer, resulting in lower residual odor and improved moisture resistance. EBECRYL® 7100 also promotes adhesion to plastic substrates and lowers viscosity when used as a primary component in UV adhesives and coatings.

TRIGLYCIDYL ISOCYANURATE JF-77B is an isocyanurate based crystalline polyepoxide compound, its molecular weight is 297(CAS Number:2451-62-9), it owns good heat resistance,weather resistance,adhesive and high temperature performance.

Exolit® AP 422 A is a fine-particle ammonium polyphosphate (phase II) with less than 0.1% melamine. The product is largely insoluble in water and completely insoluble in organic solvents. It is colorless, non-hygroscopic, non-flammable, and classified as SVHC-free under current regulations.

EVATANE® 28-03 is a random ethylene-vinyl acetate copolymer.

CYMEL® 250 Resin is a new type of mixalkylated methylated and n-butylated melamine formaldehyde resin with high imino functions. It is designed specifically for automotive coating system and does not require a strong acid catalyst for fast cure response. CYMEL® 250 Resin is similar reactivity to conventional n-butylated melamine resin. A formulation by using CYMEL® 250 Resin can achieve lower VOC, compared to a formulation by using conventional n-butylated melamine formaldehyde resin.

EVATANE® 24-03 is a random ethylene-vinyl acetate copolymer.