Products

Bluesil™ SP 3309 A2 is a highly effective superspreading trisiloxane adjuvant for addition to spray formulations of agrochemicals. Bluesil™ SP 3309 A2 can significantly reduce the surface tension of spray formulations to max. 22 mN/m (the lower limit for conventional non-silicone adjuvants is ~30mN/m). This reduction is dynamically rapid, maximizing the adhesion of spray droplets when they impact on leaf surfaces. Bluesil™ SP 3309 A2 has been extensively optimized to improve efficiency even when applied to the most waxy, hard-to wet leaf surfaces. The spray droplets completely wet the target crop or weed, wrapping onto unsprayed surfaces to deliver insecticides and fungicides to where the pests and diseases may be concealed. The superspreading capability of Bluesil™ SP3309 A2 provides exemplary spray coverage enabling the volume of spray to be reduced without loss of performance. This reduction: Limits water usage Increases coverage area per tankful allowing for faster application speed (reduced refill) Enables lighter loads (less water) for micro-farmers using back-pack sprayers. Bluesil™ SP 3309 A2 is nonionic, making it compatible with all spray mixes.

Bluesil™ MH25 A2 is straight chained polymethylhydrogensiloxane fluids.

Silcolapse® 5020 is a non-ionic aqueous emulsion containing dimethylpolysiloxane, and is highly effective for prevention, control and elimination of foam in aqueous media. Silcolapse® 5020 contains 20% of active ingredient and is designed for industrial uses. Other specialized defoaming agents exist for use in food contact please consult us about them.

Bluesil™ FLD 47 V1 000 is straight chained polydimethylsiloxanic fluids.

Bluesil™ FLD 48 V20 000 is polydimethylsiloxane silicone oils with linears chains and reactive hydroxyl end groups.

Bluesil™ FLD 48 V6 000 is a polydimethylsiloxane silicone oils with linears chains and reactive hydroxyl endgroups.

COMFORTSIL ECOSOFT E4 is a medium to low viscosity diamino functionalised polydimethyl siloxane, specially developed for formulation to emulsions for textile softening and textile resin plasticising.

Silcolapse® 721 is a non-ionic aqueous 10% active silicone antifoam and/or defoamer. It offers excellent antifoam and defoaming properties in a wide variety of aqueous applications including those with incidental food contact as well as food processing applications. The product effectively controls foam at concentrations as low as 10 ppm solids, even at elevated temperatures. The product gives good results at wide-ranging pH and provides a cost effective solution where foam is a problem.

Silcolapse® 710 is a 100% active silicone antifoam and/or defoamer. It offers excellent antifoam and defoaming properties in a wide variety of aqueous and non-aqueous applications including those with incidental food contact as well as food processing applications. The product effectively controls foam at concentrations as low as 10 ppm solids, even at elevated temperatures. The product gives good results at wide-ranging pH and provides a cost effective solution where foam is a problem.

Bluesil™ FLD 47 V300 000 is dimethylpolysiloxane polymers with linear chains.

Bluesil™ SLT 10T is a one-component, odorless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. Bluesil™ SLT 10T adheres without a primer on virtually all surfaces found in building construction and accepts movements of 25% in continuous service within a wide range of temperatures.

BLUESIL FLD 47V5-V10 are low viscosity polydimethylsiloxanic fluids.

MIRASIL PEG 12 DM is a water soluble polyether modified polysiloxane used as emollient for personal care. In addition this product may be used as foam booster, emulsifier, plasticizing agent and wetting agent for personal care products.