Enhanced TDS
Identification & Functionality
- CASE Ingredients Functions
- Chemical Family
- Function
- Catalyst
- Product Code
- MITM00208
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Product Benefits
- Fast cure response
- Excellent stability in waterborne and solventborne systems
- Minimizes film wrinkling
Applications & Uses
- Dosage Information
- CYCAT® 4045 CATALYST contains 20% active acid and has an equivalent acid number of 60-70.
- Therefore, it is 50% less active than the un-blocked CYCAT 4040 catalyst.
- Therefore, in comparison with CYCAT 4040 catalyst it is recommended that twice the level of CYCAT® 4045 CATALYST be used to provide approximately the same cure response.
- In systems containing highly alkylated amino crosslinking resins such as CYMEL® 303 LF resin in combination with hydroxyl or carboxy functional acrylic or polyester resins, the following starting point levels of CYCAT® 4045 CATALYST are recommended:
Polymer type Cure Temperature (°C) Catalyst Level (% catalyst solution based on total resin solids) R-OH >150
125-150
110-1251.0
2.0
4.0R-COOH 150-175
125-1501.0
2.0- Typical Coating Characteristics
- System: White high solids acrylic enamel, 73% NV by wt, Pigment/Binder=80/100
- Binder:: Acryloid AT-400 (Product of Rohm & Haas) acrylic resin/CYMEL 303 resin= 80/20 (solids wt ratio)
- Catalyst: Equivalent to 1% CYCAT 4040 catalyst on TRS
- Cure: 20 minutes at 125°C
Properties
- Physical Form
- Soluble In
Technical Details & Test Data
- Catalysis Information
- In order to prevent recrystallization of the acid, a sufficiently high level of alcohol should be present in the total solvent system of the formulation.
- Recrystallized acid can cause a reduction in cure response and may create local areas of high acidity that could cause the formation of gel structures.
- Therefore, it is suggested that CYCAT® 4045 CATALYST be diluted approximately 1:1 with an alcohol before adding to the final formulation.
Packaging & Availability
Other
- ADR/RID/ADN Proper Shipping Name
- Other regulated substance, liquid, N.O.S.
- ADR/RID/ADN UN Number
- NA3082
- Acid Number
- 60.0-70.0 mg KOH/g
- Active Content
- 20.0 %(W/W)
- Appearance
- Clear liquid
- Appearance (SDS)
- Liquid
- Color (SDS)
- Yellow
- Color Scale
- 1.0 Gardner
- Density
- 9.6 lb/gal
- Density (SDS)
- 1.16 g/cm³
- Evaporation Rate (SDS)
- max. 1.0 %
- Flash Point (SDS)
- min. 99.0 °C
- Gloss
- 82.0
- Gloss
- 97.0
- Hardness
- 15.6 HV
- Item Number
- Non-Volatile Content
- 35.0 %(W/W)
- Odor (SDS)
- Glycol
- Other Hazards
- Not applicable
- Oxidizing Properties (SDS)
- None
- Principal
- Specific Gravity
- 1.16
- USA/DOT Proper Shipping Name
- Other regulated substance, liquid, N.O.S.
- USA/DOT Technical name (N.O.S.)
- Ethylene Glycol
- USA/DOT UN Number
- NA3082
- Volatile Content (SDS)
- 65.0 %(W)
- Volatile Organic Content (VOC) (SDS)
- 61.0 %(M/M)
- pH (SDS)
- 7.5-8.5
- Optical Properties
Value Units Test Method / Conditions Color Scale 1.0 Gardner Gardner Gardner Color Scale - Chemical Properties
Value Units Test Method / Conditions Acid Number 60.0-70.0 mg KOH/g mg KOH/g - Mechanical Properties
Value Units Test Method / Conditions Gloss 82.0 - At 20°C Gloss 97.0 - At 60°C Hardness 15.6 HV HV - Physical Properties
Value Units Test Method / Conditions Density 9.6 lb/gal lb/gal Specific Gravity 1.16 - at 25°C - Material Composition
Value Units Test Method / Conditions Active Content 20.0 %(W/W) %(W/W) Non-Volatile Content 35.0 %(W/W) %(W/W) at 100°C, 60 min, Pan - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Density (SDS) 1.16 g/cm³ g/cm³ Evaporation Rate (SDS) max. 1.0 % % Flash Point (SDS) min. 99.0 °C °C Closed Cup Volatile Content (SDS) 65.0 %(W) %(W) at 105°C Volatile Organic Content (VOC) (SDS) 61.0 %(M/M) %(M/M) pH (SDS) 7.5-8.5 -