Products

Focus Nilfoam 250 is a highly efficient organo-silicone defoamer. This product can be used both in the concentrate or tank side when diluted in water (~10:1).

CYMEL® U-80 Resin is a highly n-butylated urea resin supplied at >96% solids content. Its high extent of alkylation and hydrophobic nature make the CYMEL® U-80 Resin suitable for a wide range of coating applications, including high solids primers for automotive, general industrial, and container coatings, providing improved film flexibility and adhesion to various substrates. CYMEL® U-80 resin is insoluble in water but can be used in emulsified form as a crosslinking agent in water-dispersible alkyds, acrylic resins, and in emulsion systems.

PARALOID™ B-67 100% Resin is particularly compatible with medium and long-oil alkyds, drying oils, and oleoresinous varnishes. When used to modify these materials, coatings with improved hardness, faster drying speed, and better retention of color and gloss result. Hold out and brushing characteristics are also improved.

BONDERITE® L-FG RD-5 is a smokeless, water based graphite coating used in a wide variety of metalworking operations.BONDERITE® L-FG RD-5 (known as RD-5) forms a uniform dry film coating when sprayed on surfaces at temperatures up to and exceeding 600°F (316°C).

AIRASE® 5700 is a very compatible defoamer concentrate based on polyether siloxane technology. Contains fumed silica.

Dynasylan® VTMO is a bifunctional organosilane possessing a reactive vinyl group and a hydrolyzable inorganic trimethoxysilyl group. The dual nature of its reactivity allows Dynasylan® VTMO to bind chemically to both inorganic materials (e.g. glass, metals, fillers) and organic polymers (e.g. thermosets, thermoplastics, elastomers), thus functioning as a crosslinking agent, adhesion promoter and/or surface modifier. Dynasylan® VTMO is a colorless, low-viscosity liquid with a typical aromatic odor.

TEGO® Wet 236 is a siloxane-based superwetter providing exceptional substrate wetting and good flow and leveling in waterbornecoatings and inks.

EBECRYL® 8604 is an aliphatic urethane tetraacrylate. As the main resin, EBECRYL 8604 offers excellent reactivity combined with good hardness and toughness. As a co-resin, EBECRYL 8604 blended with higher functional (penta or greater) oligomer(s) improves reactivity and weatherability while increasing the ductility with minimum impact surface hardness. Films of EBECRYL 8604 cured by ultraviolet light (UV) or electron beam (EB) combine abrasion resistance, hardness, and excellent exterior durability.

EBECRYL® 242N is a tin-free aliphatic urethane acrylate diluted in isobornyl acrylate (IBOA).

CYMEL® U-1054 resin is a partially n-butylated urea crosslinking agent supplied in a mixture of n-butanol and ethanol. CYMEL® U-1054 resin is suitable for industrial heat cured primer formulations because of the excellent adhesion, water and corrosion resistance properties. In can coating formulations, CYMEL® U-1054 provides an excellent balance between adhesion and film flexibility, especially after several cure cycles.

EBECRYL® 1710 is an acrylic polymer diluted 60% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDDA)(1). EBECRYL® 1710 is used as the primary or a modifying oligomer in ultraviolet light (UV) or electron beam (EB) curable formulations to improve film properties such as adhesion and lay-down.

Protectosil® WB CONCENTRATE is a clear, penetrating, breathable water repellent for use on brick, concrete masonry units and some natural stones. A 100% concentrated alkyltrialkoxysilane which is intended to be diluted with water and provides the high performance traditionally associated with alcohol carried systems. Prevents water and waterborne contaminants from entering the sub- strate and causing premature deterioration. Protectosil® WB CONCENTRATE is especially suited for imparling water repellency to substrates such as brick masonry and split-face block. By preventing water and waterborne contaminants from entering the substrate, Protectosil® WB CONCENTRATE reduces such problems as efflorescence, leaching, acid rain deterioration, scaling, dirt buildup, staining and corrosion of reinforcing steel. Treated surfaces are fully breathable because the natural moisture vapor transmission is not affected. This will eliminate problems caused by entrapped moisture, including blushing of the sealer and freeze-thaw damage to the masonry.

TEGO® Rad 2300 is an efficient non-foaming, radically cross-linkable substrate wetting and slip additive. Recommended even for high shear applications and the wetting of low energy substrates including fresh litho inks.

EBECRYL® 1365 is a hexa-functional silicone modified urethane acrylate diluted in 50% of EBECRYL® 160. EBECRYL® 1365 can be used to prepare UV/EB curable coatings with low surface energy providing anti-stain and easy-to-clean properties. Additionally EBECRYL® 1365 can be used as a processing agent in matt and excimer curable formulations, facilitating a uniform film creation which in turn significantly increases the process robustness.

TEGO® Foamex 825 is a compatible defoamer emulsion based on polyether siloxane technology. Good balance of effectiveness and compatibility.