Enhanced TDS
Identification & Functionality
- Basestock
- Chemical Family
- Product Code
- MITM13097
- RTU Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Benefits
Thermal and Mechanical Stability
• Superior mechanical stability versus other thickeners, particularly in the presence of heat and water
• High dropping point, typically in excess of 300oC .Load Carrying & Wear Protection
• Excellent EP and AW properties inherent in the thickener
• Does not require the use of additional additives. Resistance to Water
• Excellent resistance to water washout. Corrosion Resistance
• Sulfonates are known and used for their excellent rust prevention properties
• This property is inherent in the thickener
• Will easily outperform all other technologies . Resistance to Oxidation
• The use of premium antioxidants ensures excellent thermal and oxidation stability
Applications & Uses
- Application Area
- Markets
- Applications
- Product Applications
G-2000-2 Grease exceeds the requirements for NLGI GC/LB certification and is therefore suitable for use in automotive and truck wheel bearings and chassis components. It is also an excellent multipurpose industrial bearing grease and has found use in all manner of moderate to heavy duty industrial applications.
Properties
Regulatory & Compliance
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S000008
- Principal
Other
- Insoluble in (SDS)
- Water
- Item Number
- USA/DOT UN Number
- Not Applicable
- Thermal Properties
Value Units Test Method / Conditions Bomb Oxidation Pressure Drop 9.0 psi ASTM D942 per 1000 Hours - Shelf Life & Stability
Value Units Test Method / Conditions Salt Fog Corrosion Resistance min. 1000.0 hr ASTM B117 1 mil d.f.t., salt fog - Mechanical Properties
Value Units Test Method / Conditions Bearing Life Performance 100.0 hr ASTM D3527 Fretting Wear 5.7 mg ASTM D4170 Hardness -4.0 Shore D Shore Durometer Scale Load Wear Index 62.0 kgf ASTM D2596 Load Wear Index 62.0 kgf Four-Ball Extreme Pressure Test Mechanical Stability Change 2.4 % ASTM D217 100000 strokes Mechanical Stability Change 8.0 % worked 10,000 strokes, with 50/50 water Scar Diameter 0.42 mm ASTM D2266 Scar Diameter 0.42 mm Four Ball Wear Test Timken OK Load Test 27.2 kg ASTM D2509 Torque 12.0 Nm ASTM D4693 at -40°C Weld Point 500.0 kg - Physical Properties
Value Units Test Method / Conditions Drop Point 605.0 °F ASTM D2265 Grease Leakage Tendency 4.0 gm ASTM D4290 Kinematic Viscosity 135.0 cSt ASTM D445 at 40˚C, base oil Oil Separation 0.2 % ASTM D1742 Water Washout Loss 0.5 % ASTM D1264 at 80°C , removed - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Density (SDS) 0.95-1.05 g/cm³ at 25°C Drop Point (SDS) 260.0 °C Flash Point (SDS) min. 180.0 °C Cleveland Open Cup Relative Density (SDS) 0.95-1.05 - at 25°C Vapor Pressure (SDS) max. 8.0 hPa At 20°C