Products

BONDERITE® L-GP M 210 is a colloidal dispersion of molybdenum disulfide in alcohol. BONDERITE® L-GP M 210 ACHESON (known as MOLYDAG 210) offers excellent extreme-pressure lubrication in a resin-bonded system that air dries in five to ten minutes. The material is easily applied by standard spray, brush, or dip methods to all substrates not affected by the fluid component. BONDERITE® L-GP M 210 ACHESON (known as MOLYDAG 210) is supplied as a concentrate to be used as is or diluted in appropriate solvent for final application.

G-2000-2 is a member of a family of technologically advanced greases which have been developed by complexing modified overbased calcium sulfonates. This technology, developed and patented by Chemtura, is characterized by exceptional mechanical stability, high dropping point, high load carrying performance, reduced wear, and excellent resistance to water and corrosion. This technology equals and in many ways outperforms other premium, high temperature greases such as Lithium Complex, Aluminum Complex and Polyurea.

ROYALE BLACK® PP1201 is a cost-efficient black for coloration and covering power in a variety of applications, such as thinner multilayer films, engineering plastics, pipes and drip laterals where particle size of <25 nm is mandatory. It has very low filterability index (Delta P) and is also suitable for coarser fibre applications. ROYALE BLACK® PP1201 is a beaded black and filled masterbatch that has good absorption, good color, strength and good covering power. This product is commonly used where good weathering resistance and opacity is required. The dispersibilty of ROYALE BLACK® PP1201 depends on the equipment used and the formulation.

TEGO® Wet 500 is a silicone-free substrate wetting additive with low foam tendecy. It is highly recommended for water borne coatings with dynamic applications.

3M™ Glass Bubbles S32HS are high-strength, low-density additives specially formulated to afford greater survivability than other lightweight additives under demanding processing conditions. They are hollow glass microspheres made from water-resistant and chemically-stable soda-lime borosilicate glass. These hollow glass microspheres can be used as a low-density filler material for many applications. 3M glass bubbles help to reduce weight, reduce noise, vibration and harmonics; reduce thermal expansion and contribute to cost savings. They are used in a variety of applications in diverse markets, including automotive, construction materials, electronics, marine and paints and coatings.

Orient Black® N326 is a low structure carbon black of N300 series grade and is characterised by medium surface area offering high elongation, flexibility and tear strength in rubber application.

TEGO® DISPers 755 W is a slightly anionic,polymeric high-performance wetting and dispersing additive for waterborne formulations.Suitable for all kindsof pigments. With organic pigments, the outstanding stabilization and viscosity reduction can be observed. Low influence on coating properties, therefore suitable for exterior applications in industrial and transportation coating.Solvent-free.

Baerostab® B-2172 is a Barium/Zinc Liquid Stabilizer.

Bleumina® 223 is a series of Medium/High Color Furnace (MCF/HCF) blacks that provide excellent esthetics, along with high durability, in the final product. With very low particle size and a balance of structure, it exhibits good UV protection, high jetness, and gloss.

Bleumina® 312 is a series of Medium/High Color Furnace (MCF/HCF) blacks that provide excellent esthetics, along with high durability, in the final product. With very low particle size and a balance of structure, it exhibits good UV protection, high jetness, and gloss.

ZINC OXIDE 104P is a brilliant white powder manufactured by the French (Indirect) Process. Grade 104 is our popular medium particle size zinc oxide offering high assay and very low impurities. Grade 104 is approved for pharmaceutical drug use as an excipient, is USFDA approved as GRAS (Generally Recognized As Safe) at 21cfr182.8991 and is authorized by the USFDA for use wherever GRAS is approved including food contact in rubber, plastics, and coatings.

Addocat® 108 is a catalyst for the production of PUR flexible slabstock foam and hot-molded foam. It is also used for HR foam and, as a co-catalyst, for rigid foam.

DERTOPHENE® 1510 is a high softening point terpene phenolic resin with high polarity. Thanks to its excellent compatibility with chloroprene and acrylics, this resin improves adhesion, peel strength by preserving outstanding cohesive balance.

SpectraSyn™ 8 low temperature properties, low volatility, and improved thermal stability. SpectraSyn™ 8 Low Viscosity PAO products have high viscosity indices which translate to improved flow at low temperatures and increased film thickness at high temperatures. SpectraSyn™ 8 Low Viscosity PAO products are the primary basestocks for synthetic lubricants used in passenger car engines, heavy-duty diesel engines, transmissions, gear boxes and a variety of industrial applications.

3M™ Boron Nitride Cooling Filler Platelets 012 is a versatile ceramic material offering thermal conductivity, temperature stability, chemical resistance, high reflectivity, light weighting and electrical insulation. The structure of layered hexagonal plates provides outstanding lubricating properties and is non-abrasive to tooling.