Enhanced TDS
Identification & Functionality
- CASE Ingredients Functions
- Chemical Family
- Chemical Name
- Function
- Antioxidant, Charge Control Agent, Light Stabilizer, Stabilizer
- Plastics & Elastomers Functions
- Product Code
- MITM02943
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Plastics & Elastomers End Uses
- Product Applications
- Light stabilizer (HALS) for plastics, especially for very thin parts (fibres, films), can be used as antioxidant.
- Hostavin® N 30 Pdr is an oligomeric HALS, with secondary and tertiary amine characteristics.
- In coatings it can be used as light stabilzer, process stabilizer and charge control agent.
- Typical dosage is in a range of 0.5 to 3 %.
Properties
Regulatory & Compliance
- Certifications & Compliance
- Contains any chemicals listed on Prop 65 (including impurities, residues, catalysts, monomers, and by-products and excluding heavy metals)?
Packaging & Availability
- Packaging Type
- Product Packaging
- Pallet 500 kg (20 pasteboards)
- Pasteboard 25 kg
Principal Information
- Group Principal Number
- S000004
- Principal
Storage & Handling
- Storage Conditions
- For best shelf life store this product in a dry area at normal ambient temperatures
- Minimum shelf life is 5 years from the date of shipping when properly stored.
Other
- Appearance
- White powder
- Appearance (SDS)
- Powder
- Color (SDS)
- White
- Dust Explosion Class (SDS)
- ST-2
- Explosive Nature (SDS)
- Non explosive
- Insoluble in (SDS)
- Water
- Item Number
- Other Hazards
- No additional hazards are known except those derived from the labelling
- USA/DOT UN Number
- Not Applicable
- Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life1 5.0 yr yr - Physical Properties
Value Units Test Method / Conditions Viscosity min. 1.8 mm²/s mm²/s DIN 51562 at 25°C, 20% in toluene lodine Color Number max. 4.0 - DIN 6162 20% in toluene - Material Composition
Value Units Test Method / Conditions Volatile Content max. 15.0 % % Internal Method at 300°C, 30min - Application Information
Value Units Test Method / Conditions Dosage (Use Level) 0.5-3.0 % % - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Autoignition Temperature (SDS) 734.0 °F °F of powder dust Decomposition Temperature (SDS) min. 680.0 °F °F Differential Scanning Calorimetry heating rate: 3 K/min Decomposition Temperature (SDS) min. 360.0 °C °C Differential Scanning Calorimetry heating rate: 3 K/min Decomposition Temperature (SDS) min. 680.0 °F °F Closed Cup heating rate: 3 K/min Deflagration Index (SDS) 245.0 bar.m/s bar.m/s Density (SDS) 1.1 g/cm³ g/cm³ at 73°F / 23⁰C Flash Point (SDS) min. 500.0 °F °F Closed Cup Flash Point (SDS) min. 500.0 °F °F EN 22719 Flash Point (SDS) min. 260.0 °C °C EN 22719 Minimum Ignition Energy (SDS) 12.2-14.3 MJ MJ Without Inductive Electrical Resistance Softening Point (SDS) min. 298.0 °F °F DIN EN 1427 Vapor Pressure (SDS) 0.000069 mbar mbar At 212°F