Enhanced TDS
Identification & Functionality
- Fluids & Lubricants Functions
- Product Code
- MITM15300
- Technologies
- Product Families
Applications & Uses
- Applicable Processes
- Fluids & Lubricants End Use
- Fluids & Lubricants Type
- Product Applications
- POLYGLYKOL D 41/40000 M 60 is based on a polyalkylene glycol containing ethylene oxide and propylene oxide (ratio 4:1) and two terminal hydroxyl groups.
- POLYGLYKOL D 41/40000 M 60 is used as thickening and lubricating component for fire resistant hydraulic fluids (HFC and HFC-E types) and for water-based quenching fluids. It can also be used as a water soluble, lubricating component for fully synthetic metal working fluids.
- POLYGLYKOL D 41/40000 M 60 is acceptable as an ingredient for the use in lubricants with incidental food contact (HX-1) for use in and around food processing areas.
Properties
- Physical Form
- Soluble In
- Note
- Typical Properties are for guidance only and not to be taken as product specifications. The tolerances are given in the product specification sheet.
- * Contact angle of water on V2A steel: 64°.
- ** Surface tension of water: 71.6 mN/m.
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S000004
- Principal
Storage & Handling
- Storage Conditions
When stored in a cold, dry place in a closed container POLYGLYKOL D 41/40000 M 60 can be kept for at least two years.
Other
- Appearance
- Clear viscous liquid
- Appearance (SDS)
- Liquid
- Explosive Nature (SDS)
- Not explosive
- Item Number
- Miscible in (SDS)
- Water
- Other Hazards
- None known
- Oxidizing Properties (SDS)
- Not oxidising
- USA/DOT UN Number
- Not Applicable
- Optical Properties
Value Units Test Method / Conditions Color Scale max. 3.0 Gardner - Chemical Properties
Value Units Test Method / Conditions pH 10.0 - 10% Solution in Water - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 2.0 yr - Mechanical Properties
Value Units Test Method / Conditions Contact Angle 57.4 ° 5% in aqueous solution*, V2A Steel - Physical Properties
Value Units Test Method / Conditions Cloud Point 78.0 °C 1% aqueous solution Cloud Point 70.0 °C 5g in 25g 25% BDG Density 1.087 g/cm³ DIN 51757 at 20°C Viscosity 2100.0-3000.0 mm²/s At 40°C - Material Composition
Value Units Test Method / Conditions Active Content 60.0 % - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) approx. 212.0 °F Decomposition Temperature (SDS) 344.0-346.0 °C Differential Scanning Calorimetry heating rate: 3 K/min Density (SDS) 1.087 g/cm³ DIN 51757 at 20°C Kinematic Viscosity (SDS) 2200.0-3000.0 mm²/s At 38°C Log Partition Coefficient (Log Pow) (SDS) max. -1.0 - Log Pow, n-Octanol/Water Solidification Point (SDS) -22.0 °F Vapor Pressure (SDS) approx. 23.0 hPa At 20°C pH (SDS) 9.5-11.5 - DIN 19268