Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- CI Name
- CI Number
- Chemical Family
- Chemical Name
- Function
- Opacifier
- Product Code
- MITM16350
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Labeling Claims
- Ready-to-Use Product Features
Applications & Uses
- Application Area
- Plastics & Elastomers End Uses
- Product End Uses
- Markets
- Applications
Properties
Regulatory & Compliance
- Certifications & Compliance
- Contains any chemicals listed on Prop 65 (including impurities, residues, catalysts, monomers, and by-products and excluding heavy metals)?
- Quality Standards
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S003252
- Principal
Other
- ADR/RID/ADN Proper Shipping Name
- Not Applicable
- ADR/RID/ADN UN Number
- Not Applicable
- Appearance (SDS)
- Black color
- Dust Explosion Class (SDS)
- ST-1
- IATA/ICAO Proper Shipping Name
- Not Applicable
- IATA/ICAO UN Number
- Not Applicable
- IMO/IMDG Proper Shipping Name
- Not Applicable
- IMO/IMDG UN Number
- Not Applicable
- Insoluble in (SDS)
- Water
- Item Number
- Odor (SDS)
- Odorless
- Other Hazards
- May form combustible dust concentrations in air. Keep away from all ignition sources including heat, sparks and flame and dust accumulations to minimize explosion hazard, Do not expose to temperatures above 300°C. Hazardous products of combustion can include carbon monoxide (CO), carbon dioxide (CO 2 ), oxides of sulfur, and organic products, May cause reversible mechanical irritation to the eyes, skin and respiratory tract especially at concentrations above the occupational exposure limit., May form combustible dust concentrations in air. Keep away from all ignition sources including heat, sparks and flame and dust accumulations to minimize explosion hazard., Do not expose to temperatures above 300°C. Hazardous products of combustion can include carbon monoxide (CO), carbon dioxide (CO 2 ), oxides of sulfur, and organic products., May cause reversible mechanical irritation to the eyes, skin and respiratory tract especially at concentrations above the occupational exposure limit.
- USA/DOT UN Number
- Not Applicable
- Optical Properties
Value Units Test Method / Conditions Color Intensity 60.0 % - Physical Properties
Value Units Test Method / Conditions Sieve Fractionation (Retained) 40.0 ppm +325 mesh Specific Surface Area 28.0 m²/g - Application Information
Value Units Test Method / Conditions Dosage (Use Level) 50.0 % Drip irrigation pipe system Dosage (Use Level) 50.0 % Injection moulded goods Dosage (Use Level) 50.0 % LDPE films greater than 40 micron thickness - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Autoignition Temperature (SDS) min. 140.0 °C Explosive Pressure (SDS) 10.0 bar Explosive Pressure Rise Rate (SDS) 30.0-100.0 bar/s Ignition Temperature (SDS) min. 500.0 °C BAM Furnace Cloud Ignition Temperature (SDS) min. 500.0 °C VDI 2263 Cloud Ignition Temperature (SDS) min. 400.0 °C VDI 2263 Layer Initial Boiling Point (SDS) min. 4000.0 °C Lower Explosive Limit (SDS) 50.0 g/m³ Melting Point (SDS) min. 3500.0 °C Minimum Ignition Energy (SDS) min. 10000.0 MJ Molecular Weight (SDS) 12.01 g/mol Percent Volatile (SDS) max. 2.5 % non-oxidised carbon black Percent Volatile (SDS) 2.0-8.0 % oxidised carbon black pH (SDS) 2.0-10.0 - at 20°C, 50 g/L, water, as supplied