Products

MAINCOTE™ AE-58 is an aqueous acrylic emulsion copolymer which can be crosslinked with waterborne dispersions of epoxy resin in two-component acrylic/epoxy coatings. The resulting acrylic/epoxy coatings have properties such as low VOC, long pot life, and outstanding hardness, UV durability and solvent/chemical resistance. The high performance coatings can be used in a variety of interior and exterior applications for metal and concrete surfaces, such as institutional wall coatings and industrial metal primers, topcoats and direct-to-metal (DTM) coatings.

CYMEL® 27-802 resin is a general purpose partially n-butylated melamine resin supplied in a mixture of n-butanol and xylene . CYMEL® 27-802 combines fast curing speed with good resistance properties making it suitable for a wide variety of industrial bake finishes including decorative metal coatings

ZINC STEARATE RSN 131 HS GRANULAR CODE 8512 is a high bulk density, free-flowing granular powder.

Rostabil TNF is an antioxidant and thermal stabilizer used in lubricants and functional fluids, paints and coatings, and plastics and elastomers. It functions as a heat stabilizer and general stabilizer.

Roflex T70L is a flame retardant used in industrial additives and plastics and elastomers.

EBECRYL® 745 is an acrylic polymer diluted 46% by weight with a 1/1 ratio of the reactive diluents 1,6-hexanediol diacrylate (HDDA)(1) and tripropylene glycol diacrylate (TPGDA) . EBECRYL 745 is used as the primary or modifying oligomer in ultraviolet light (UV) or electron beam (EB) curable formulations to increase adhesion on difficult substrates.

CYMEL® NF 3041 is a formaldehyde-free, partially n-butylated crosslinking agent supplied in n-butanol. It was designed primarily for use in 2 pack ambient cure solvent-borne conversion varnishes for industrial wood. Systems containing CYMEL® NF 3041 exhibit superior catalyzed pot life relative to typical urea-based conversion varnishes and require significantly less catalyst to effect cure. The resulting coatings have excellent appearance, early hardness, resistance properties, and hot/cold cycle flexibility.

ELVACE® 735 is a low VOC product used in packaging adhesives and waterborne adhesives. It functions as a binder and resin in CASE ingredients and as a resin in plastics and elastomers.

MAINCOTE™ EC-11 is an acrylic polymer recommended for use in elastomeric coatings for industrial maintenance applications on both metal and cementitious substrates. When formulated as an anti-corrosive coating, MAINCOTE™ EC-11 Acrylic Emulsion can be applied to both clean and marginally-prepared rusty steel, and imparts excellent corrosion resistance, adhesion, low temperature flexibility and dirt pickup resistance. When applied to concrete surfaces, MAINCOTE™ EC-11 Acrylic Emulsion provides excellent resistance to blistering and the stresses imparted by thermal cycling. It is especially useful in applications where prevention of spalling and scaling of the concrete surface, caused by exposure to water and deicing chemicals, is required. The proper formulation and elastomeric nature of MAINCOTE™ EC-11 Acrylic Emulsion facilitates the production of coatings with excellent flexibility, very low VOC levels (< 50 g/L), and the ability to be applied in thick films (e.g., 10-20 mils dry) without sagging or mudcracking.

PARALOID™ B-72 100% Resin is a general purpose, low cost acrylic resin that retains the outstanding characteristics of acrylic resins, such as transparency, durability, flexibility, and resistance characteristics. PARALOID™ B-82 Solid Grade Thermoplastic Acrylic Resin is also available at 51% solids in Toluene.

WWT578283 Tr08283 Red Oxide 101 BS Dispersion is a pigment used as a case ingredient in industrial markets.

Rostabil TPP is an antioxidant and thermal stabilizer used in paints and coatings and plastics and elastomers. It is suitable for transesterification processes and functions as a heat stabilizer and general stabilizer.

CYMEL® MB-98 resin is a butylated melamine crosslinker with high degree of alkylation and very low free formaldehyde. It has been specially designed to improve the resistance properties of urea-based acid curing wood coating formulations.

MAINCOTE™ HG-54D has established the performance standard for acrylic waterborne maintenance paint vehicles. It can be formulated into primers and gloss topcoats which are designed for commercial, institutional, and industrial maintenance markets. The full gloss capability, corrosion resistance, flow, hardness, and chemical resistance characteristics imparted by MAINCOTE™ HG-54D Acrylic Resin in a waterborne finish are typical of those associated with conventional solvent-based maintenance systems. Primer formulations exhibit stability with commonly used corrosion-inhibiting pigments.

MAINCOTE™ HG-86 is a binder and resin used in primers, traffic paints, and waterborne paints. It features early rain resistance, easy application, excellent glass bead retention, fast drying, high durability, low VOC, night visibility, and prolongs wear life.