Enhanced TDS
Identification & Functionality
- Chemical Family
- Plastics & Elastomers Functions
- Product Code
- MITM12810
- Technologies
- Product Families
- Chemical Structure
Features & Benefits
- CASE Ingredients Features
- Materials Features
- Product Benefits
- Low color
- Increased peel strength in epoxy adhesives
- Increased toughness
Applications & Uses
- Adhesive & Sealant End Applications
- Compatible Polymers & Resins
- Composites End Use
- Product Applications
- Crosslinker for polyurea
- Co-reactant in epoxy sytems where adhesion promotion and flexibility are important
- Surfactant and corrosion inhibitor applications
Properties
- Physical Form
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S002219
- Principal
Storage & Handling
- Handling Information
At temperatures of 75-100°F (24-38°C) Tanks, Lines, valves Carbon steel Pumps Carbon steel Heat exchange surfaces Stainless steel Hoses Stainless steel, polyethylene, polypropylene, and TEFLON®
Gaskets, packing Polypropylene or TEFLON® (elastomers such as neoprene, Buna N, and VITON® should be avoided)
Atmosphere Nitrogen or dry air At temperatures above 100°F (38°C) Tanks Stainless steel or aluminum Lines, Valves Stainless steel Pumps Stainless steel or Carpenter 20 equivalent Atmosphere Nitrogen - ZHENGDA® ZT-1500 Amine-terminated Polyether may be stored under air at ambient temperatures for extended periods.A nitrogen blanket is suggested for all storage, however, to reduce the effect of accidental exposure to high temperatures and to reduce the absorption of atmospheric moisture and carbon dioxide. It should be noted that pronounced discoloration is likely to occur at temperatures above 140°F (60°C), whatever the gaseous pad.
- Cleanout of lines and equipment containing ZHENGDA® ZT-1500 Amine-terminated Polyether can be accomplished using warm water and steam. In the event of spillage of this product, the area may be flushed with water. The proper method for disposal of waste material is by incineration with strict observance of all federal, state, and local regulations.
Other
- Appearance
- Colorless to pale yellow liquid with slight haze permitted
- Appearance (SDS)
- Liquid
- Color (SDS)
- max. 50
- Insoluble in (SDS)
- Water
- Item Number
- Other Hazards
- None
- Temperature Control
- No
- USA/DOT UN Number
- Not Applicable
- Chemical Properties
Value Units Test Method / Conditions Amine Hydrogen Equivalent Weight 952.0 g/eq g/eq Equivalent Weight 1904.0 g/eq g/eq Isocyanates Free Amine Content 0.5-0.57 meq/g meq/g - Optical Properties
Value Units Test Method / Conditions Color Scale max. 25.0 Pt-Co Pt-Co - Physical Properties
Value Units Test Method / Conditions Density 8.31 lb/gal lb/gal At 25°C Flash Point 213.0 °C °C Pensky-Martens Closed Cup (PMCC) Viscosity 819.0 cSt cSt At 25°C - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Density (SDS) 0.996 g/mL g/mL At 25°C Flash Point (SDS) 235.0 °C °C Pensky-Martens Closed Cup (PMCC) Molecular Weight (SDS) 5000.0 g/mol g/mol Primary Amine Content (SDS) min. 97.0 % % Relative Density (SDS) 1.0 - Total Amine Content (SDS) 0.5-0.57 meq/g meq/g Vapor Density (SDS) 1.0 g/mL g/mL Vapor Pressure (SDS) max. 0.01333 - Viscosity (SDS) 819.0 mm²/s mm²/s at 25°C Water Content (SDS) max. 0.25 % % pH (SDS) 11.2 - - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 0.0 -