Products

CYREZ® 963 is a crosslinking agent from the chemical mixtures and blends family, used in plastics and elastomers.

CYREZ® 964 LF is a non-irritant crosslinking agent from the chemical mixtures and blends family, used in plastics and elastomers.

CYREZ® 400 functions as a crosslinking agent in plastics and elastomers.

CYREZ® 964 is a crosslinking agent and adhesion promoter from the chemical mixtures and blends family, used in plastics and elastomers.

EBECRYL® TMPTMA is a trifunctional methacrylate monomer that will readily copolymerize with other unsaturated compounds using radical curing mechanisms. Polymerization can be accomplished thermally using peroxide or azo type radical initiators, with ultraviolet (UV) or visible light using radical photoinitiators, or with high energy electrons (EB). EBECRYL® TMPTMA is typically copolymerized with other unsaturated compounds such as vinyl, methacrylate and acrylate functional materials to increase crosslinking and improve cured polymer properties such as hardness, chemical resistance and thermal resistance.

PM-500-18 is an MDI-based, urethane binder. It is designed for use in systems where extended processing times are required.

CARPOL® GSP-520 is a glycerin/sucrose-initiated polyether polyol. The high functionality of the initiators yields a resultant polyol with a nominal functionality of five and a typical hydroxyl number of 520. Due to this polyol’s high functionality, it is typically used in rigid foam and its applications. Blending CARPOL® GSP-520 with other polyether polyols allows for foam systems with high to lower degrees of crosslinking.

CARPOL® EDAP-800 is an ethylenediamine-initiated polyether polyol. The resulting material has a nominal functionality of four and a typical hydroxyl number of 800. This tetrol is polymerized with ethylene and propylene oxides and is autocatalytic due to its amine content. This polyol’s functionality makes it optimal for use in rigid foams as a crosslinking modifier. In addition, CARPOL® EDAP-800 can also be used as a curative for most C.A.S.E. applications.

CARPOL® GSP-370 is a glycerin/sucrose-initiated polyether polyol. The high functionality of the initiators yields a resultant polyol with a nominal functionality of seven and a typical hydroxyl number of 370. Due to this polyol’s high functionality, it is typically used in rigid foam and its applications. Blending this polyol with other polyether polyols allows for foam systems with high to lower degrees of crosslinking. In addition, CARPOL® GSP-370 is mildly catalytic, which enables the use of less catalyst while still providing the formulator with control over the system’s reactivity.

CARPOL® GSP-280 is a glycerin/sucrose-initiated polyether polyol. The high functionality of the initiators yields a resultant polyol with a functionality of seven and a typical hydroxyl value of 280. Due to this polyol’s functionality, its niche is rigid foam and its applications. Blending this polyol with other polyether polyols allows for foam systems with high to low degrees of crosslinking. In addition, CARPOL® GSP-280 is mildly catalytic, which enables the use of less catalyst while still providing the formulator with control over the system’s reactivity.

CARPOL® GSP-355 is a glycerin/sucrose-initiated polyether polyol. The high functionality of the initiators yields a resultant polyol with a nominal functionality of 4.5 and a typical hydroxyl number of 355. Due to this polyol’s high functional nature, it is typically used in rigid foam and its applications. Blending this polyol with other polyether polyols allows for foam systems with high to low degrees of crosslinking. In addition, CARPOL® GSP-355 is a neutral material, which presents the formulator with complete catalytic control over a system.

CARPOL® EDAP-770 is an ethylenediamine-initiated polyether polyol. The resulting material has a nominal functionality of four and a typical hydroxyl number of 770. This tetrol is polymerized solely with propylene oxide and is autocatalytic due to its amine content. This polyol’s functionality makes it optimal for use in rigid foams as a crosslinking modifier. In addition, CARPOL® EDAP-770 can also be used as a curative for most C.A.S.E. applications.

Dynasylan® AMEO is a bifunctional silane possessing a reactive primary amino group and hydrolyzable ethoxysilyl groups. The dual nature of its reactivity allows Dynasylan® AMEO to bind chemically to both inorganic materials (e.g. glass, metals, fillers) and organic polymers (e.g. thermosets, thermoplastics, elastomers) thus functioning as an adhesion promoter, crosslinker, and/or surface modifier.

Dynasylan® HS2926 is a surface modifier, coupling agent, and crosslinking agent compatible with elastomers, rubbers, glass, metal, mineral substrates, thermoplastics, and thermosetting plastics. It functions as a coupling agent, crosslinking agent, and surface modifier in industrial additives.

Dynasylan® MEMO is a methacrylfunctional silane that can be used as adhesion promoter, surface modifier, co-monomer for polymer synthesis and crosslinker. Dynasylan® MEMO is a clear, colorless liquid. It is soluble in alcohols, and aliphatic or aromatic hydrocarbons.