Products

D.E.R.® 663U Solid Epoxy Resin is a low molecular weight solid reaction product of epichlorohydrin and bisphenol A. D.E.R.® 663U Solid Epoxy Resin is a low molecular weight, solid epoxy resin developed mainly for use in powder coatings. It can be incorporated in both pure epoxy and epoxy/polyester systems where the relationship between its melt viscosity and softening point properties ensures the production of homogeneous powders with good gloss, excellent flexibility and smoothness, and good storage stability. D.E.R.®. 663U Resin can also be used in epoxy ester applications, for example, in industrial or automotive coatings.

Hostavin® 3212 liq is a 100% liquid blend of an oxalanilide based UV absorber with a low molecular weight HALS.

CYMEL® U-80 Resin is a highly n-butylated urea resin supplied at >96% solids content. Its high extent of alkylation and hydrophobic nature make the CYMEL® U-80 Resin suitable for a wide range of coating applications, including high solids primers for automotive, general industrial, and container coatings, providing improved film flexibility and adhesion to various substrates. CYMEL® U-80 resin is insoluble in water but can be used in emulsified form as a crosslinking agent in water-dispersible alkyds, acrylic resins, and in emulsion systems.

TEGO® Wet 236 is a siloxane-based superwetter providing exceptional substrate wetting and good flow and leveling in waterbornecoatings and inks.

ACEMATT® OK 630 is a wax-treated, medium particle-sized precipitated silica. By offering very high compatibility, it can be used in a large variety of coatings.

CYMEL® U-1054 resin is a partially n-butylated urea crosslinking agent supplied in a mixture of n-butanol and ethanol. CYMEL® U-1054 resin is suitable for industrial heat cured primer formulations because of the excellent adhesion, water and corrosion resistance properties. In can coating formulations, CYMEL® U-1054 provides an excellent balance between adhesion and film flexibility, especially after several cure cycles.

TEGO® Foamex 825 is a compatible defoamer emulsion based on polyether siloxane technology. Good balance of effectiveness and compatibility.

TEGO® AIREX 991 shows very strong defoaming against both macro- and micro foam in solvent borne and high solids coatings. Especially for spray-applied coatings.

TEGO® AddBond LTW-B improves adhesion and flexibility of solvent borne coatings on steel, galvanized steel, aluminum, and plastics.

HECTGEL RD is a synthetic layered silicate consisting of Li, Mg and Si. Its structure is constituted by two layers of Si-O tetrahedron with one layer of Mg-O octahedron. It can hydrate with water and swell to form clear and colorless colloidal dispersions. Highly thixotropic gels can be formed at concentrations of 2% or more and these gels demonstrate highly shear thinning behavior. HECTGEL RD is used where a shear sensitive waterborne gel structure is desired, having high viscosity under low shear and low viscosity when exposed to high shear. Upon removal of shear the gel viscosity is quickly recovered.

ACEMATT® 790 is an untreated, medium particle sized precipitated silica. It is especially recommended for coil coatings, as well as general industrial coatings.

Dynasylan® PTMO an alkyltrialkoxysilane is important component in sol­gel systems. Dynasylan® PTMO is a colorless, low­viscosity liquid. Dynasylan® PTMO is regarded as trifunctional since all three alkoxy groups can hydrolyze. Dynasylan® PTMO also contains a propyl group that adds hydrophobic character to sol­gel coatings. Hydrolysis leads to silanol groups which, in a subsequent condensation reaction, form very stable siloxane bonds (­Si­O­Si­). Condensation occurs parallel to hydrolysis once a certain amount of silanol groups have been formed. The absolute and relative rates of hydrolysis and condensation depend on a number of factors. The most important factors include pH, concentration, solvent, temperature and the catalyst.

D.E.H.® 84 is a Phenolic hardener containing 1.9% curing accelerator.

FH-988A is a highly purified, powdered montmorillonite clay. FH-988A can disperse in water forming suspension gel. It can be used as anti-settling agent, latex stabilizer and rheological additive in water system. Excellent thixotropy. Suits to wide PH range(6-12).Good anti-dilution, swelling and can provide medium-high viscosity.

TEGO® Foamex 845 is an effective defoamer emulsion based on polyether siloxane technology. Provides additional foam break-down effect.