Enhanced TDS
Identification & Functionality
- CASE Ingredients Functions
- Chemical Family
- Function
- Dispersant, Wetting Agent, Grinding Aid
- Product Code
- MITM11670
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Labeling Claims
Applications & Uses
- Coating End Applications
- Compatible Substrates & Surfaces
- Markets
- Applications
- Product Uses
- To improve wetting properties as supplied calculated on total formulation: 0.2 - 0.3 %
- To improve intermediate stabilization as supplied calculated on total formulation: 0.5 - 2.0 %
- Processing Information
Add before grinding.
Properties
Regulatory & Compliance
- Certifications & Compliance
- Contains any chemicals listed on Prop 65 (including impurities, residues, catalysts, monomers, and by-products and excluding heavy metals)?
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S000006
- Principal
Storage & Handling
- Storage and Handling Condition
Keep away from direct sunlight. Overheating of an ethoxylate stored under air should be avoided. When an ethoxylate is vigorously mixed in the presence of air or oxygen at temperatures > 125°F (> 50°C), it can degrade product quality.Storage under an inert atmosphere is recommended. Keep containers tightly closed in a dry, cool, and well-ventilated place. Product is freeze-thaw stable; if it phase separatesor freezes at colder temperatures, warm container to 40°C and mix thoroughly before use.
Other
- Appearance
- Clear pale yellow liquid
- Color (SDS)
- Colorless light yellow
- Item Number
- Odor (SDS)
- Mild
- USA/DOT UN Number
- Not Applicable
- Physical Properties
Value Units Test Method / Conditions Viscosity 80.0 mPa.s At 25°C - Material Composition
Value Units Test Method / Conditions Active Content 88.0 % - Application Information
Value Units Test Method / Conditions Dosage (Use Level) 0.5-2.0 % To improve intermediate stabilization Dosage (Use Level) 0.2-0.3 % wet end applications - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Flash Point (SDS) min. 98.0 °C Relative Density (SDS) 15.0 - Vapor Pressure (SDS) 18.67 hPa pH (SDS) 7.0 -