Products

Beta Sol® is a plant additive with at least 97% glycine-betaine content. Glycine betaine is a crystalline powder obtained from sugar beet molasses. BetaSol® improves plant growth and yield under abiotic stress conditions.

Bluesil™ SP 3307 is a polyether modified polysiloxane.

Bluesil™ EMUL E1P is an oil in water emulsion containing 35% of a silicone oil. It can be used in many industries.

Bluesil™ SP 3309 A2 is a highly effective superspreading trisiloxane adjuvant for addition to spray formulations of agrochemicals. Bluesil™ SP 3309 A2 can significantly reduce the surface tension of spray formulations to max. 22 mN/m (the lower limit for conventional non-silicone adjuvants is ~30mN/m). This reduction is dynamically rapid, maximizing the adhesion of spray droplets when they impact on leaf surfaces. Bluesil™ SP 3309 A2 has been extensively optimized to improve efficiency even when applied to the most waxy, hard-to wet leaf surfaces. The spray droplets completely wet the target crop or weed, wrapping onto unsprayed surfaces to deliver insecticides and fungicides to where the pests and diseases may be concealed. The superspreading capability of Bluesil™ SP3309 A2 provides exemplary spray coverage enabling the volume of spray to be reduced without loss of performance. This reduction: Limits water usage Increases coverage area per tankful allowing for faster application speed (reduced refill) Enables lighter loads (less water) for micro-farmers using back-pack sprayers. Bluesil™ SP 3309 A2 is nonionic, making it compatible with all spray mixes.

CARPOL® NIONIC™ 1400 Polyglycol is a nonionic surfactant with a chemical structure designed to make it act as a defoamer in many applications. Even at very low concentrations, CARPOL® Nionic™ 1400 can be used to reduce the superficial tension of liquids, including high viscosity liquids. Defoaming performance is a function of cloud point and end use temperature and CARPOL® NIONIC™ 1400 has a high cloud point of 77o C. These materials are water soluble at low temperatures and will flocculate when warmed above their cloud point.

CARPOL® NIONIC™ 850 Polyglycol is a nonionic surfactant with a chemical structure designed to make it act as a defoamer in many applications. Even at very low concentrations, CARPOL® Nionic™ 850 can be used to reduce the superficial tension of liquids, including high viscosity liquids. Defoaming performance is a function of cloud point and end use temperature. These materials are water soluble at low temperatures and will flocculate when warmed above their cloud point.

Ceridust® 1060 Vita is a micronized polar modified wax based on renewable resource.

ALFONIC 1216CO-3 Ethoxylate is a biodegradable nonionic based on a linear primary alcohol formulated to simulate that derived from coconut oil. It is liquid at room temperature, essentially 100% active, and has the following structural formula: CH₃(CH₂)ₓ(OCH₂CH₂)₃OH where ‘x’ varies between 11 and 15. The narrow range version of this ethoxylate, made using Sasol Chemicals patented NOVEL catalyst technology, is also available.

AEROSIL® 200 Coating is a hydrophilicfumed silica with a specific surface area of 200 m²/g. Widely usable in a broad range of applications.

AEROSIL® 200 Silica is a hydrophilic fumed silica with a specific surface area of 200 m²/g. Widely usable in a broad range of applications.

AEROSIL® 200 V is a densified hydrophilic fumed silica with a specific surface area of 200 m²/g.

AEROSIL® R 972 is a fumed silica aftertreated with DDS (Dimethyldichlorosilane)

AEROSIL® R 972 W is a fumed silica aftertreated with DDS (Dimethyldichlorosilane). The product thickening efficiency of AEROSIL® R 972 W ex RHE is consistent with the Waterford-produced AEROSIL® R 972 W. This profile is dif- ferent than the thickening profile of standard RHE quality.

AEROSIL® R 972 W Coating is a fumed silica aftertreated with DDS (Dimethyldichlorosilane). The product thickening efficiency of AEROSIL® R 972 W Coating ex RHE is consistent with the Waterford-produced AEROSIL® R 972. This profile is dif- ferent than the thickening profile of standard RHE quality.

AEROSIL® 200 VS is a densified hydrophilic fumed silica with a specific surface area of 200 m²/g.