Products

DERTOPHENE® T 115 is a light-colored and low VOC terpene phenolic resin. It is compatible with various polymers and suitable for solvent based, hot melt adhesives.

Foral® AX resin is a thermoplastic, acidic resin produced by hydrogenating gum rosin to an exceptionally high degree. Foral® AX has a very light initial color and its strong resistance to oxidation results in excellent color retention in a wide range of applications. It is used as a tackifier and resin modifier in solvent adhesives and hot melt applied coatings and adhesives that must excel in these properties.

ROBOND™ PS-90AF Adhesive is a permanent pressure-sensitive adhesive which is characterized by a balance of moderate shear strength and tack. This adhesive has demonstrated excellent performance in both carton sealing tape and overlaminate applications. The viscosity and excellent stability allows it to be used with a variety of coating methods. It is coater-ready product and may be direct coated to a variety of facestocks.

H.B. Fuller® PD-0431 is a carboxylated, surfactant stabilized acrylic emulsion polymer.

DERCOLYTE® S 115 is produced from the polymerisation of beta pinene. Is a tackifying resin recommended to improve the adhesive properties (tack, adhesion) of solvent based adhesive formulations, particularly in pressure sensitive adhesives (PSA).

SUKOREZ® NX-710 is a waterwhite thermoplasic resin obtained from polymerization and hydrogenation of cyclic ingredients. The major usages are tackifier for hot melt adhesive(HMA), hot melt pressure sensitive adhesive(HMPSA) and solvent based pressure sensitive adhesive(SBPSA), because of its good heat resistance and good compatibility with base polymers such as metallocene catalyzed polyolefin(me-PO), ethylene vinyl acetate(EVA), styrene block copolymer(SBC) and amorphous polyalphaolefin(APAO).

SUKOREZ® SU-120 is a waterwhite thermoplasic resin obtained from polymerization and hydrogenation of cyclic ingredients. The major usages are tackifier for hot melt adhesive(HMA), hot melt pressure sensitive adhesive(HMPSA) and solvent based pressure sensitive adhesive(SBPSA), because of its good heat resistance and good compatibility with base polymers such as ethylene vinyl acetate(EVA), styrene block copolymer(SBC).

SUKOREZ® SU-110 is a waterwhite thermoplasic resin obtained from polymerization and hydrogenation of cyclic ingredients. The major usages are tackifier for hot melt adhesive(HMA), hot melt pressure sensitive adhesive(HMPSA) and solvent based pressure sensitive adhesive(SBPSA), because of its good heat resistance and good compatibility with base polymers such as ethylene vinyl acetate(EVA), styrene block copolymer(SBC).

DERCOLYTE® S 125 is produced from the polymerisation of beta pinene. Is a tackifying resin recommended to improve the adhesive properties (tack, adhesion, heat resistance) of solvent based adhesive formulations, particularly in pressure sensitive adhesives (PSA).

DERMULSENE® RE 1513 is an aqueous, solvent free resin based on stabilized rosin ester.

HIKOREZ® A-1100 is pale yellow thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are tackifier for pressure sensitive adhesive, because of its well balanced PSA properties such as tackness, adhesive strength and cohesive strength. And this grade also can be use as the binder for hot melt road marking.

HIKOREZ® T-3100 is pale yellow thermoplastic C9 modified C5 resin. It is obtained from polymerizing unsaturated aliphatic and aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are tackifier for solvent based pressure sensitive adhesive (SBPSA), hot melt based pressure sensitive adhesive (HMPSA) and hot melt adhesive (HMA).

Staybelite® Ester 10 is the glycerol ester of partially hydrogenated gum rosin. It is a pale, thermoplastic resin with excellent resistance to oxidation and discoloration. It is recommended for use as a tackifying resin for many adhesive applications, particularly pressure sensitive and emulsion types. In general, it is useful where there is need for pale, non-oxidizing, and color stable resin.

DzBh Baling® SIS YH-1106 is a linear styrene/isoprene block copolymer.

HIKOREZ® T-1100 is pale yellow thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are tackifier for solvent based pressure sensitive adhesive (SBPSA), hot melt based pressure sensitive adhesive (HMPSA) and hot melt adhesive (HMA).