Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Chemical Name
- Product Code
- MITM16497
- Single Ingredient
- Yes
- Synonyms
- Glycerol ester of partially hydrogenated wood rosin, Hydrogenated rosin glycerides
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Adhesive & Sealant End Applications
- Coating End Applications
- Compatible Polymers & Resins
- Compatible Substrates & Surfaces
- Markets
- Applications
- Usage Information
- Used in solvent, hot melt, and emulsion adhesives based on thermoplastic and elastomeric materials
- Tackifier in emulsion form for natural rubber, SBR, and neoprene latex in aqueous based adhesives
- Tackifier for natural rubber, SBR, polyisobutylene, and methacrylate resins in industrial tape uses
- Tackifier for surgical tape and in EVA resin- based hot melt adhesives
- Hot melt applied barrier coatings, chlorinated rubber finishes and various protective coatings compositions
- Component of depilatory wax compounds
Properties
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Quality Standards
Principal Information
- Group Principal Number
- S002297
- Principal
Storage & Handling
- Storage Information
- Stability of about 6 months in standard storage conditions, sheltered and temperature-controlled (<25°C).
- No stacking of pallets.
- Remove the plastic film protection from the pallet once correctly stored.
- As this product is sensitive to gradual oxidation and to compaction, appropriate storage and a strict inventory control is critical (oldest material used first) especially during hot periods.
- Over time, storage at higher temperature and pressure (from stacking pallets) will accelerate re-massing of this product.
Other
- ADR/RID/ADN UN Number
- Not Applicable
- Color (SDS)
- Light yellow
- Explosive Nature (SDS)
- Non explosive
- Flammable Nature (SDS)
- Non flammable
- Item Number
- Odor (SDS)
- Pine
- Other Hazards
- Resin dust may ignite on contact with electrostatic discharge or exposure to flame or other sources of ignition. Hot molten product: may burn if ignited.
- Oxidizing Properties (SDS)
- Non-oxidising
- USA/DOT UN Number
- Not Applicable
- Optical Properties
Value Units Test Method / Conditions Color Scale 6.0 Gardner 50 red/ 50 tolerance - Chemical Properties
Value Units Test Method / Conditions Acid Value 8.0 mg KOH/g - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 6.0 mo - Physical Properties
Value Units Test Method / Conditions Density 1.07 kg/L At 25°C Softening Point 75.0 °C Ring and Ball Test Storage Temperature -100.0-77.0 °F - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Decomposition Temperature (SDS) min. 300.0 °C OECD 103 Flash Point (SDS) min. 180.0 °C Regulation (EC) No. 440/2008, Annex, A.9 Partition coefficient n-octanol/water (SDS) 4.7-5.8 - OECD 117 at 25°C Relative Density (SDS) 1.0-1.1 - Regulation (EC) No. 440/2008, Annex, A.3 at 20°C Softening Point (SDS) 70.0-77.0 °C ASTM E28 Solubility In Water (SDS) 0.15 mg/L OECD 105 at 20°C Vapor Pressure (SDS) max. 100.0 Pa Regulation (EC) No. 440/2008, Annex, A.4 at 25°C