Products

EBECRYL® 3701 is a modified bisphenol A epoxy diacrylate. EBECRYL® 3701 imparts flexibility and toughness to ultraviolet light (UV) or electron beam (EB) cured coatings and inks while maintaining such desirable properties as fast cure response and superior chemical resistance that are typical of standard epoxy acrylates.

EBECRYL® 3701-20T is the modified bisphenol A epoxy diacrylate, EBECRYL 3701, diluted 20% by weight with the reactive diluent trimethylolpropane triacrylate (TMPTA)(1) to provide a lower viscosity, easier handling product. Films of EBECRYL® 3701-20T cured by ultraviolet light (UV) or electron beam (EB) exhibit flexibility, abrasion resistance, high gloss, and superior chemical resistance.

TEGO® AIREX 902 W is a highly effective and compatible deaerator emulsion based on polyether siloxane technology. Outstandingly effective against micro- and macro-foam.

EBECRYL® 860 is an epoxidized soya oil acrylate especially suited to improving the flow and leveling of ultraviolet light (UV) or electron beam (EB) curable inks and coatings. Pigment wetting and adhesion are often enhanced when EBECRYL® 860 is used as a modifier in inks and clear or pigmented coatings on paper and metal.

TEGO® AIREX 921 is a silicone-free deaerator concentrate that provides outstanding compatibility. Fast and efficient foam breakdown.

TEGO® AIREX 944 shows excellent defoaming against both micro- and micro-foam. Suitable for a broad range of coating systems. Ideally suited for high-solid and 2K solvent-free formulations.

TEGO® AIREX 978 is a very strong deaerator concentrate that provides excellent effectiveness against micro- and macro-foam in solvent borne, radiation-curing and high solids coatings and inks. Very suitable for high build and high viscosity applications.

EBECRYL® 8414 is a urethane acrylate developed for liquid energy curable thermoforming inks. Flexographic inks made with EBECRYL® 8414 exhibit excellent thermoformability with draws up to 1" without cracking, blistering, separation or loss of adhesion. This medium viscosity oligomer has good pigment wetting capability and ink performance.

TEGO® AIREX 904 W is a very effective deaerator concentrate based on polyether siloxane technology. Very effective against micro-foam in combination. Offers good compatibility.

EBECRYL® 571 is a diluted polyester resin for narrow web shrink sleeve applications. It exhibits excellent adhesion, high flexibility, and superb shrink performance. For optimum performance EBECRYL 571 should be the dominant resin in the heat shrink ink formulation. EBECRYL 571 contains dipropyleneglycol diacrylate (DPGDA)(1) monomer.

AIRASE® 8070 is an effective deaerator concentrate based on polyether siloxane technology. Very effective against micro-foam. Offers good compatibility.

AIRASE® 5700 is a very compatible defoamer concentrate based on polyether siloxane technology. Contains fumed silica.

EBECRYL® 4827 is an aromatic urethane diacrylate. Films of EBECRYL® 4827 cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, low color and good adhesion to various substrates.

EBECRYL® 810 is a polyester tetraacrylate that exhibits low viscosity and good cure response. Films of EBECRYL 810 cured by ultraviolet light (UV) or electron beam (EB) demonstrate surface hardness, chemical resistance and generally good adhesion. EBECRYL® 810 is particularly suited to application methods requiring low viscosity such as solventless spray and vacuum coating.

EBECRYL® P115 is a copolymerizable amine used as a hydrogen donor, or photoactivator, in ultraviolet light (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. benzophenone), EBECRYL® P115 provides rapid UV cure response in air by mitigating the effects of oxygen inhibition at the coating or ink surface. Recommended levels are from 5 to 15% based on the total formulation, usually combined with 3-5% photosensitizer. EBECRYL® P115 can be used with EBECRYL® P39 (1) (a polymeric benzophenone derivative) to produce UV cured coatings and inks with low residual odor.