Enhanced TDS
Identification & Functionality
- CASE Ingredients Functions
- Function
- Photoinitiator
- Product Code
- MITM00475
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Performance Highlights
- EBECRYL® P115 is characterized by:
- Light color
- Low viscosity
- Improved stability vs. conventional tertiary amines
- Low volatility
- UV/EB cured products based on EBECRYL® P115 are characterized by the following performance properties:
- Excellent UV cure response
- Reduced odor
- No surface migration of amine
- High gloss
- The final properties of UV/EB cured products also depend on the selection of other formulation components such as reactive diluents, additives and photoinitiators.
- EBECRYL® P115 is characterized by:
Applications & Uses
- Application Method
- Coating End Applications
- Compatible Substrates & Surfaces
- Cure Method
- Ink & Toner End Applications
- Markets
- Applications
- Product Application
- Formulated UV curable products containing EBECRYL® P115 may be applied via direct or reverse roll, offset gravure, metering rod, slot die, knife over roll, air knife, curtain and immersion and spin coating methods, as well as flexographic and screen printing.
- EBECRYL® P115 is recommended as a reactive co-initiator in the following applications:
- Overprint varnishes
- Screen and flexo inks
- Wood topcoats
- Clear coatings on paper and plastics
- Pigmented coatings
Properties
- Physical Form
Packaging & Availability
Principal Information
- Group Principal Number
- S000001
- Principal
Storage & Handling
- Storage and Handling Conditions
- Care should be taken not to expose the product to high temperature conditions, direct sunlight, ignition sources, oxidizing agents, alkalis or acids.
- This might cause uncontrollable polymerization of the product with the generation of heat.
- Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers.
- Procedures that remove or displace oxygen from the material should be avoided.
- Do not store this material under an oxygen free atmosphere.
- Dry air is recommended to displace material removed from the container.
- Wash thoroughly after handling.
- Keep container tightly closed.
- Use with adequate ventilation.
Other
- Appearance
- Clear liquid
- Appearance (SDS)
- Liquid
- Color (SDS)
- Yellow
- Item Number
- Odor (SDS)
- Ester
- Other Hazards
- Polymerization may occur from excessive heat, contamination or exposure to direct sunlight .
- Protect from Freezing
- Yes
- USA/DOT UN Number
- Not Applicable
- Application Information
Value Units Test Method / Conditions Dosage (Use Level) 5.0-15.0 % % - Chemical Properties
Value Units Test Method / Conditions Free Amine Content 238.0 %(W/W) %(W/W) - Optical Properties
Value Units Test Method / Conditions Color Scale max. 2.0 Gardner Gardner Gardner Color Scale - Physical Properties
Value Units Test Method / Conditions Density 0.99 g/mL g/mL At 25°C Storage Temperature 39.2-104.0 °F °F Viscosity 15.0-25.0 mPa.s mPa.s At 25°C - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) min. 100.0 °C °C Density (SDS) 0.99 g/cm³ g/cm³ Flash Point (SDS) min. 100.0 °C °C Cleveland Open Cup Vapor Pressure (SDS) max. 1.33 hPa hPa at 20°C Volatile Content (SDS) max. 0.3 % % - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 0.0 d d