Products

SURFYNOL® 104 PG 50 is a multifunctional surfactant providing combined dynamic wetting and molecular defoaming in waterborne coatings and inks.

LIPOTIN® DB is a wetting and dispersing additive for solventborne formulations. It provides good wetting of pigments and introduces a pseudoplastic flow behavior.

ACOUSTICRYL™ AV-1420 is powered by the AVANSE™M Resin Technology, is an acrylic copolymer emulsion designed specifically for the use in sprayable waterborne damping coatings.

CARPOL® NIONIC™ L-101 Surfactant is a nonionic surfactant with a chemical structure designed to make it act as a defoamer in many applications. Even at very low concentrations, CARPOL® NIONIC™ L-101 can be used to reduce the superficial tension of liquids, including high viscosity liquids. Defoaming performance is a function of cloud point and end use temperature and CARPOL® NIONIC™ L-101 is a good general/low temperature defoamer. They are water soluble at low temperatures and will flocculate when warmed above their cloud point

CARPOL® NIONIC™ P1200 Polyglycol is a linear polymer produced by the polymerization of propylene oxide with propylene glycol. The P1200 nomenclature indicates a propylene oxide based product with a molecular weight of 1200. It is a clear, viscous liquid at room temperature with a low vapor pressure. It exhibits excellent lubricity and can be used in synthetic lubricant applications. It is suitable as an antifoam agent in latex formulations, pulp and paper processing, emulsion paints, and various food processes.

HIKOREZ® T-2093 is pale yellow thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are hot melt based pressure sensitive adhesive(HMPSA), especially Stryene-Isoprene-Styrene (SIS) based PSA. And this grade also can be used as tackifier for hot melt adhesive(HMA), because of its good compatibility with base polymer such as EVA.

CARPOL® GP-725 is a glycerin-initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 700 Da. This triol is polymerized with propylene oxide and then capped with 25% ethylene oxide. The outcome is a polyol with enhanced reactivity when compared to its counterpart CARPOL® GP-700. Main applications include C.A.S.E., however, CARPOL® GP-725 may also be included as a component in other urethane products and applications.

AEROXIDE® Alu C Silica is a fine-particulate, pure aluminium oxide with high specific surface area and marked aggregate and agglomerate structure. Because of it high purity and low water content, the product can be used well as an additive to an organic materials, for heat insulation, and also as a catalyst substrate. The positive surface charge can be used to control the electrostatic charge.

TEGO® AddBond HS improves adhesion and flexibility of solvent borne coatings on steel, galvanized steel, aluminum, and plastics. It is highly suitable for high-solid coatings.

AEROSIL® R 9200 is a structure modified, hydrophobicfumed silica.

D.E.R.® 3213 functions as a binder and resin in CASE ingredients.

WANNATE® HB-100 is an aliphatic biuret polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in of 25% n-butyl acetate, colorless to slightly yellowish clear liquid.

Inhibicor™ 1000 corrosion inhibitor pigment is an effective replacement for Cr6+ in Aerospace primer applications on Aluminum.

RHOPLEX® 4400 is a 100% acrylic latex binder designed to provide wide formulation latitude for caulks and sealants. These high solids, low Tg emulsion can be formulated without plasticizer to meet the performance requirements of ASTM C920 Class 12.5 to 35 and ASTM C-834 Grade -18°. Sealants formulated with RHOPLEX® 4400 provide reduced dirt pick-up, mildew growth and paint discoloration, as well as excellent weatherability.