Products

Waterborne Aluminium Paste (Silicate treatment) EMR-D3040 is a chemical mixture used in industrial coatings, automotive and transportation coatings, and printing and inks. It is applied in metallic paints.

ORGASOL® 2001 EXD NAT 1 is a spheroïdal powder of polyamide 12, with 10 µm as average diameter and a narrow particle size distribution. An extremely high level of quality is achieved thanks to our rigorous control of particle size distribution, providing excellent consistency in performance.

TEGO® AIREX 920 is a silicone-free deaerator concentrate that provides outstanding compatibility. Fast and efficient foam breakdown.

EBECRYL® 444 is a reactive chlorinated polyester resin diluted 40% with the reactive diluent propoxylated glycerol triacrylate (OTA-480) (1). EBECRYL® 444 is not based on bisphenol A raw materials, and is tin-free. It exhibits good lithographic behavior and pigment wetting properties, and fast cure response in ultraviolet light (UV) curable coatings and inks. Cured films of EBECRYL® 444 display good adhesion to metals, and paper.

AERODISP® W 7520 is a low viscosity, water-based dispersion of AEROSIL® fumed silica, with a slightly alkaline pH

Rilsan® BESN BLACK TL is used in coatings for metal tube coatings and in plastics & elastomers for gasoline lines, hoses, and tubes. It is heat and light stabilized and functions as a binder & resin in CASE ingredients and as a resin in plastics & elastomers.

TEGO® DISPers 653 is a waterborne wetting and dispersing additive specifically for the production of universal colorants for decorative coatings. Wets and stabilizes inorganic and organic pigments. Can be used for a whole colorant line. Anionic and solvent-free.

REAFREE® 4781 is a TGIC cure resin, 93/7 type, for outdoor durable thermosetting powder coatings. TMA free.

CRAYVALLAC® WF-1000, with its fine particle size and very low coefficient of friction, provides the formulator with an excellent aid to controlling the frictional characteristics of a coating as well as enhancing its surface protection properties. Furthermore, the very high melting point of CRAYVALLAC® WF-1000 makes it an excellent choice for high temperature applications.

EBECRYL® 1140 is used in radiation-curable coatings. It functions as a binder and resin in CASE ingredients.

Exolit® AP 428 is a fine-particle ammonium polyphosphate produced by a special method. The product is largely insoluble in water and completely insoluble in organic solvents. It is colorless, non-hygroscopic and non-flammable. Exolit® AP 428 differs from most other commercial products in the following ways, greatly reduced solubility in water lower viscosity in aqueous suspensions, lower viscosity in PU polyol suspensions.

Dynasylan® F 8263 acts as a surface modifier on oxidic, carboxy- and hydroxyfunctional substrates (e.g. glass, ceramic). Dynasylan® F 8263 is a colorless liquid. It can be diluted in alcohols and various other organic solvents, e.g. n-hexane, xylol, acetone or ethyl acetate.

B-72 N-Propyl Acetate Solution-50% is a blend of n-propyl acetate, an acetate compound used as a binder and resin in various applications. It functions primarily as a binder in printing inks and is also used as an intermediate in industrial processes. This solution is particularly suited for use in printing ink formulations.