Enhanced TDS
Identification & Functionality
- Additives Included
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Plastics & Elastomers Functions
- Polymer Name
- Product Code
- MITM01805
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
Applications & Uses
- Coating End Applications
- Compatible Substrates & Surfaces
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Markets
- Applications
- Processing Conditions
- Typical melt temperature (Min / Recommended / Max) - Injection Molding: 230°C / 250°C / 270°C (445°F / 480°F / 520°F).
- Typical mold temperature - Injection molding: 20-60°C (70-140°F).
- Drying time and temperature: 80-90°C (175-195°F) / 4-6 hours.
Transformation Processes:
- Extrusion - General
- Sheet Extrusion
- Tube Extrusion
Properties
Principal Information
- Group Principal Number
- S000003
- Principal
Storage & Handling
- Storage Conditions
Two years from the date of delivery, when stored properly (sealed bags, appropriate moisture, UV protection and temperature)
Other
- Color (SDS)
- Black
- Insoluble in (SDS)
- Water
- Protect from Freezing
- Yes
- Temperature Control
- Yes
- USA/DOT UN Number
- Not Applicable
- Mechanical Properties
Value Units Test Method / Conditions Flexural Modulus 1280.0 MPa MPa ISO 178 at 23°C Nominal Strain at Break min. 50.0 % % ISO 527-1 at 23°C, 50 mm/min Nominal Strain at Break min. 50.0 % % ISO 527-2 at 23°C, 50 mm/min Strain at Yield 5.0 % % ISO 527-1 at 23°C, 50 mm/min Strain at Yield 5.0 % % ISO 527-2 at 23°C, 50 mm/min Stress at Yield 41.0 MPa MPa ISO 527-1 at 23°C, 50 mm/min Stress at Yield 41.0 MPa MPa ISO 527-2 at 23°C, 50 mm/min Tensile Modulus 1420.0 MPa MPa ISO 527-1 at 23°C, 1 mm/min Tensile Modulus 1420.0 MPa MPa ISO 527-2 at 23°C, 1 mm/min - Physical Properties
Value Units Test Method / Conditions Melting Point 186.0 °C °C ISO 11357-3 at 10°C/min Melting Point 186.0 °C °C ISO 11357-1 at 10°C/min Specific Gravity 1.02 - ISO 1183-1 at 23°C Storage Temperature 140.0 °F °F Water Absorption 1.9 % % ISO 62 at 23°C, immersion, equilibrium - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Autoignition Temperature (SDS) 420.0-450.0 °C °C ASTM D1929 Density (SDS) 1.02 g/cm³ g/cm³ Melting Point (SDS) 186.0 °C °C - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 0.0 d d