Products

Wayncor™ 229 is an effective multi-component, multi-phase synergistic corrosion inhibitor pigment. It is a chrome free product, and is compatible with all commercially available aqueous and solvent based resin systems. The recommended loading levels for water based systems and solvent based systems from 3 - 7% total formula weight.

AP 5948 modified cycloaliphatic amine hardener for epoxy resin based lacquers and coatings.

AP 5689 is low viscosity, modified aliphatic amine adduct hardener for epoxy resins based lacquers coatings.

Wayncor™ 222 is a white, non-refractive, anti-corrosive pigment used in protective coatings. It is widely considered by the coatings industry to be a standard corrosion inhibitor. It exhibits a high degree of versatility and is compatible with almost all commercially available aqueous and solvent based coatings. The use level will vary depending upon resin system, pigment volume concentration and desired performance parameters, however typical use levels are between 3 - 10% total formula weight.

Non-Leafing Type Aluminium Paste TZ-588A is a chemical mixture used in paints and coatings. It features non leafing properties for case ingredient applications.

Corrostain™ 228 features a unique pigment chemistry which combines the dual functionality of Corrosion Inhibition and Tannin Stain Inhibition. This dual functionality aids in the reduction of raw material inventories and also provides effective inhibitor formulations. It is designed to provide good stability and performance in both solvent and water based systems. Typical use level is between 2 - 6% based upon total formula weight.

Stainban™ 185 is an aqueous tannin stain inhibitor additive for water based primers intended for wood protection. The unique mechanism of this product allows it to effectively block tannins in stains, clear coats, and pigmented coatings. It can be easily incorporated at any stage of the manufacturing process and is compatible with a wide range of surfactant and dispersants. Stainban™ 185 is effective at any PVC value of primers, however; it is more economical at higher PVC. It may reduce, or eliminate, the need for zinc oxide and stabilizing amines in primers. Paints made with StainbanTM 185 have good storage stability and improved humidity resistance. It is HAPS free and does not contribute to VOC. Typical use level ranges from 1 - 3% based upon total formula weight.

AP 5949 is low viscosity, cycloaliphatic amine modified hardener for epoxy resin based lacquers and coatings.

Non-Leafing Type Aluminium Paste TZ-816A is a chemical mixture with non leafing properties used in case ingredient applications.

AP 5660 is a low viscosity, modified aliphatic amine hardener for epoxy resins based coatings at ambient and elevated temperature curing.

Non-Leafing Type Aluminium Paste TZ-350A is a chemical mixture used in paints and coatings. It features non leafing properties for case ingredient applications.

Hybricor™ 204S is a pigment grade hybrid corrosion inhibitor, effective in primer applications intended for cast and structural aluminum protection. It can easily be incorporated into the coating using a high speed disperser. Hybricor™ 204S has a particle size of 7 Hegman which permits its use in both primer and DTM applications.

Wayncor™ 226 is a premium multi-component corrosion inhibitor pigment that comprises distinctly different inhibitive species to provide a high degree of corrosion protection on ferrous substrates. Although versatile it is highly recommended for water based acrylic primers where a high degree of corrosion resistance is required. Typical use level is between 3 - 7% total formula weight.

Non-Leafing Type Aluminium Paste TZ-788A is a chemical mixture with non leafing properties used in case ingredient applications.

Hybricor™ 204 is an organic/inorganic hybrid corrosion inhibitor pigment, a proven effective replacement for Cr⁶⁺ in aerospace primer applications on aluminum and other non-ferrous substrates. The fine particle size of Hybricor™ 204 (7 Hegman) permits it to be easily incorporated into a coating using a high speed disperser. It is effective in primers, DTM and thin film (20 micron) applications. It does not affect pot life of 2K systems.