Enhanced TDS
Identification & Functionality
- CASE Ingredients Functions
- Chemical Family
- Product Code
- MITM16553
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Properties
Epoxy coating systems cured with AP 5949 present the following features
- Suitable for ambient temperature cure.
- High levels of mechanical stability.
- Excellent flow and leveling.
- Good weatherability
- Water spotting, water/moisture- and chemical resistance
- Resistant to blush
Applications & Uses
- Application Method
- Coating End Applications
- Compatible Polymers & Resins
- Compatible Substrates & Surfaces
- Markets
- Applications
- Applications
It is used in combination with liquid Epoxy resins or solids epoxy resin solution or epoxy resin modified by means of reactive as well as non-reactive diluents. Suitable for application with standard one-component airless spray systems. Ideal for marine and protective coatings e.g., structural steel, concrete etc. Self level floor coating.
Properties
- Physical Form
Principal Information
- Group Principal Number
- S001795
- Principal
Storage & Handling
- Storage Condition
- AP 5949 should be stored in a dry place, preferably in the sealed original container at temperatures 15 to 30°C. The Product should not be stored exposed to direct sunlight.
- Shelf Life (15 to 30°C),12 months
- Hazardous decomposition products (When in fire) Carbon monoxide, Carbon dioxide, Nitrogen Oxides and other toxic Gases & Vapors.
- Handling Information
The hardener will absorb moisture and carbon dioxide when left in open containers. This may result in increased viscosity and sometimes crystallization. Use personal protective equipments and follow industrial hygienic procedures. Recommended to use safety glasses, protective clothing, gloves, & masks suitable for chemical and solvents & their vapor.
Other
- Appearance
- Clear liquid
- Appearance (SDS)
- Clear
- Color (SDS)
- Pale yellow
- IATA/ICAO Emergency Response Guide
- 8L
- IATA/ICAO Proper Shipping Name
- Amines, liquid, corrosive, N.O.S. (3-aminomethyl-3,5,5-trimethylcyclohexylamine)
- IATA/ICAO UN Number
- UN2735
- IMO/IMDG EmS Fire
- F-A
- IMO/IMDG EmS Spill
- S-B
- IMO/IMDG Proper Shipping Name
- Amines, liquid, corrosive, N.O.S. (3-aminomethyl-3,5,5-trimethylcyclohexylamine)
- IMO/IMDG Segregation Group
- SGG18, SG35
- IMO/IMDG UN Number
- UN2735
- Insoluble in (SDS)
- Water
- Item Number
- Odor
- Amine
- Odor (SDS)
- Amine-like
- TDG Canada Emergency Response Guide Number
- 153
- TDG Canada Proper Shipping Name
- Amines, liquid, corrosive, N.O.S. (3-aminomethyl-3,5,5-trimethylcyclohexylamine)
- TDG Canada UN Number
- UN2735
- USA/DOT Proper Shipping Name
- Amines, liquid, corrosive, N.O.S. (3-aminomethyl-3,5,5-trimethylcyclohexylamine)
- USA/DOT UN Number
- UN2735
- Optical Properties
Value Units Test Method / Conditions Color Scale max. 2.0 Gardner ASTM D1544 - Chemical Properties
Value Units Test Method / Conditions Active Hydrogen Equivalent Weight 90.0 g/eq Amine Value 320.0-360.0 mg KOH/g ISO 9702 - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 12.0 mo - Physical Properties
Value Units Test Method / Conditions Density 1.0-1.04 kg/L ASTM D1475 at 25°C Gel Time 25.0-35.0 m at 25°C, 100g Set Time 4.0-6.0 hr at 25°C, 8 mils, 200 microns WFT, thin film Storage Temperature 59.0-86.0 °F Viscosity 35.0-90.0 mPa.s DIN 53015 at 25°C Viscosity 35.0-90.0 mPa.s ISO 12058 at 25°C - Material Composition
Value Units Test Method / Conditions Non-Volatile Content 100.0 %(W/W) at 105°C, 1 hour - Application Information
Value Units Test Method / Conditions Mix Ratio 32.0 pbw AP 5945 Mix Ratio 68.0 pbw Epikote 828, GY 250 - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Density (SDS) 1.01-1.04 g/cm³ ASTM D1475 at 25°C Flash Point (SDS) min. 93.0 °C Viscosity (SDS) 35.0-90.0 mPa.s DIN 53015 at 25°C Viscosity (SDS) 35.0-90.0 mPa.s ISO 12058 at 25°C