Enhanced TDS
Identification & Functionality
- CASE Ingredients Functions
- Chemical Family
- Product Code
- MITM16552
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Product Properties
Epoxy coating systems cured with AP 5689 present the following features
- Suitable for ambient temperature cure.
- High levels of mechanical stability.
- Good flow and leveling.
- Good corrosion resistance.
- Resistant to blush and exudation.
- High gloss finish.
Applications & Uses
- Application Method
- Coating End Applications
- Compatible Polymers & Resins
- Compatible Substrates & Surfaces
- Markets
- Applications
- Product Applications
It is used in combination with liquid epoxy resins or solids epoxy resin solution or epoxy resin modified by means of reactive as well as non-reactive diluents. Suitable for application with standard one-component airless spray systems. Ideal for high solid coatings e.g., structural steel, concrete etc. Self level floor coating.
Properties
- Physical Form
Principal Information
- Group Principal Number
- S001795
- Principal
Storage & Handling
- Handling Conditions
The hardener will absorb moisture and carbon dioxide when left in open containers. This may result in increased viscosity and sometimes crystallization. Use personal protective equipments and follow industrial hygienic procedures. Recommended to use safety glasses, protective clothing, gloves, & masks suitable for chemical, solvents & their vapor.
- Storage Information
- AP 5689 should be stored in a dry place, preferably in the sealed original container at temperatures 15 to 30°C. The Product should not be stored exposed to direct sunlight.
- Shelf Life (15 to 30°C), 12 months
- Hazardous decomposition products (when in fire) carbon monoxide, carbon dioxide, nitrogen oxides and other toxic gases & vapors.
Other
- Appearance
- Clear liquid
- Appearance (SDS)
- Clear
- Color (SDS)
- Pale yellow
- IATA/ICAO Emergency Response Guide
- 8L
- IATA/ICAO Proper Shipping Name
- Amines, liquid, corrosive, N.O.S. (N,N'-bis(3-aminopropyl)ethylenediamine)
- IATA/ICAO UN Number
- UN2735
- IMO/IMDG EmS Fire
- F-A
- IMO/IMDG EmS Spill
- S-B
- IMO/IMDG Proper Shipping Name
- Amines, liquid, corrosive, N.O.S. (N,N'-bis(3-aminopropyl)ethylenediamine)
- IMO/IMDG Segregation Group
- SGG18, SG35
- IMO/IMDG UN Number
- UN2735
- Item Number
- Odor
- Amine
- Odor (SDS)
- Amine-like
- TDG Canada Emergency Response Guide Number
- 153
- TDG Canada Proper Shipping Name
- Amines, liquid, corrosive, N.O.S. (N,N'-bis(3-aminopropyl)ethylenediamine)
- TDG Canada UN Number
- UN2735
- USA/DOT Proper Shipping Name
- Amines, liquid, corrosive, N.O.S. (N,N'-bis(3-aminopropyl)ethylenediamine)
- USA/DOT UN Number
- UN2735
- Optical Properties
Value Units Test Method / Conditions Color Scale max. 2.0 Gardner ASTM D1544 - Chemical Properties
Value Units Test Method / Conditions Active Hydrogen Equivalent Weight 46.0 g/eq Amine Value 630.0-670.0 mg KOH/g ISO 9702 - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 12.0 mo - Physical Properties
Value Units Test Method / Conditions Density 0.98-1.05 kg/L ASTM D1475 at 25°C Gel Time 10.0-15.0 m at 25°C, 100g Set Time 2.0-3.0 hr at 25°C, 8 mils, 200 microns WFT, thin film Set Time 10.0-12.0 hr at 5°C, 8 mils, 200 microns WFT, thin film Storage Temperature 59.0-86.0 °F Viscosity 50.0-150.0 mPa.s DIN 53015 at 25°C Viscosity 50.0-150.0 mPa.s ISO 12058 at 25°C - Application Information
Value Units Test Method / Conditions Mix Ratio 19.35 pbw AP 5689 Mix Ratio 80.65 pbw Epikote 828, GY 250 - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Density (SDS) 0.98-1.05 g/cm³ ASTM D1475 at 25°C Flash Point (SDS) min. 100.0 °C Viscosity (SDS) 50.0-150.0 mPa.s ISO 12058 at 25°C