Products

SharkDISPersion WX2™ is a vinyl-based binder, resin, and cobinder that offers antibacterial and anti-static properties, improved formulation latitude and performance, UV resistance, and water resistance.

Pale 1000 Blown Castor Oil commonly known as blown oils have increasing viscosities resulting from oxidative and crosslink polymerization at the double bonds and hydroxyl groups. Oxidative polymerization of castor oil yields products with increased viscosities and decreasing solubility in aliphatic solvents, increasing compatibility with various resins and improved ability to wet and disperse pigments while imparting solvent and abrasion resistance to lacquer systems. The polymerized oils are used to plasticize a variety of resins in adhesive and sealant systems, inks and hot melts. The heavier viscosity polymerized oils are processing aids and plasticizers for rubber polymers, imparting oil and solvent resistance.

Synthomer ADS H190 is a medium to high molecular weight, solid polyvinyl acetate. It is and adhesives or met designed for use in solvent based coatings, inks extrusion systems. profile additive in Synthomer ADS H190 can also be used as a low unsaturated polyester processes. composites, typically pultrusion and BMC processses

EMULSION E-2353 is a hard, all acrylic emulsion designed for use in factory applied, waterborne, interior and exterior wood coatings. Its self crosslinkable chemistry offers good exterior durability and is recommended for interior/exterior primers and topcoats. If EMULSION E-2353 is too hard, it can be blended with a soft polymer, such as RHOPLEXTM AC-261. It can also be reacted with melamine formaldehyde resins, the combination of which offers an extremely durable finish, ideally suited for long term warranty applications.

EBECRYL® 180 is a multifunctional reactive diluent with a high degree of acrylic unsaturation and finds use in a variety of ultraviolet light (UV) and electron beam (EB) curable coatings and ink systems where a high degree of crosslinking is desired. EBECRYL® 180 is a mixture of predominantly the tri- and tetra-acrylate esters of pentaerythritol. EBECRYL® 180 has a higher ratio of tetra- to tri-acrylate ester than the similar product PETIA, and therefore typically crystallizes at normal ambient temperatures.

DB™ Oil is the highest grade of refined castor oil. It was developed for use in applications when a low acidity and moisture content are critical.

ACRYSOL™ ASE-75 Thickener is an acid containing, acrylic emulsion copolymer. When the emulsion is diluted with water and neutralized with a base, each emulsion particle swells greatly. The emulsion clarifies under these conditions and becomes highly viscous. ACRYSOL™ ASE-75 Thickener is effective in improving mid to low shear rate (Brookfield) viscosity, resulting in coatings that have highly shear thinning characteristics.

HFGEL 120-X is an organoclay for solvent-based systems of low to medium polarity.

Synthomer ADS H206 is a low molecular weight, solid polyvinyl acetate. It is designed for use in solvent based coatings, inks and adhesives or melt extrusion systems.

CARPOL® GP-3000 is a glycerin-initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 3000 Da. This triol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E., however, CARPOL® GP-3000 may also be included as a component in other urethane products and formulations.

CHROMASHINE® BL20-X functions as an effect pigment and pigment.

Polycin® GR-50 is a 100% solids, castor oil-based derivative designed for use as a primary polyol or reactive diluent in polyurethane sealants and adhesives systems. Polycin® GR-50 imparts low hardness and provides VOC reduction while offering the beneficial properties of castor oil derivatives, such as improved flow and levelling.

CYMEL® UM-15 resin is a highly methylated urea crosslinker supplied as a liquid at >96% solids. Its high solids combined with very fast cure makes CYMEL® UM-15 resin suitable in high solids, low temperature curing systems, like wood and paper coatings. CYMEL® UM-15 is hydrophilic in nature, completely water soluble, and has very good compatibility with water soluble anionic backbone polymers. This makes CYMEL® UM-15 resin suitable for waterborne applications, like paper and wood coatings, where speed of cure is very important.

PD-28 is white mineral oil, a mineral oil used in fluids and lubricants.

RHOPLEX® AC-464 is a binder and resin used in waterborne paint applications, functioning as a binder.