Enhanced TDS
Identification & Functionality
- Blend
- No
- Chemical Family
- Chemical Name
- EC Number
- 618-358-7
- Product Code
- MITM08772
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Materials Features
- Key Features
- Rapidly dissolves in most organic solvents
- Can be melt processed
- Easily plasticised
- Can be combined with other Synthomer M Grades
- Excellent substrate adhesion & high film flexibility
- Very high light stability
Applications & Uses
- Adhesive & Sealant End Applications
- Coating End Applications
- Ink & Toner End Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Product Applications
- Solvent based adhesives including
- Parquet flooring
- Solvent based inks & coatings
- Thermomouldable fabrics
- Heat seal adhesives
- Processing Information
Dissolving
Synthomer ADS H206 is soluble in many organic solvents such as esters, ketones, aromatic hydrocarbons including styrene and lower alcohols. A more
detailed list is available on the datasheet Solvent Solubility and Plasticiser Compatibility, Synthomer ADS H206 should be added carefully to the solvent system under sufficient agitation to ensure dispersion of the polymer beads.
Melt
Synthomer ADS H206 is thermoplastic and will gradually soften and flow with increasing temperature. Heat activated coatings and adhesives can also be easily formulated.
Compatibility
Synchomer ADS H206 is compatible with other M Grade polymers, and can be mixed in any proportion to modify either solution or dry film properties. Synthomer ADS H206 can be plasticised with many types of plasticiser to modify film properties.
Properties
Regulatory & Compliance
- Contains any chemicals listed on Prop 65 (including impurities, residues, catalysts, monomers, and by-products and excluding heavy metals)?
Packaging & Availability
- Packaging Type
- Packaging Information
Synthomer ADS H206 is supplied in 25kg paper sacks. Each sack carries the grade number, batch number and net weight. The product is palletised on a 1000kg pallet. stretch wrapped and marked with the rele- rant shipping marks.
Principal Information
- Group Principal Number
- S000191
- Principal
Storage & Handling
- Storage and Shelf Life Conditions
- Synthomer ADS H206 is very thermoplastic and will gradually soften with increasing temperature. The product should therefore be stored in a cool, dry location, ideally be- low +15°C (+59°F). Pallets should not be stacked. Further information is available on the data- sheet Storage of Solid Products.
- Synthomer M solid products should remain fit for use for many years, provided they are stored as recommended. However it is good practice to test material which has been stored for some time. We therefore advise testing before use, if the material has been stored for 12 months or more.
Other
- Appearance
- Solid colorless beads
- Appearance (SDS)
- Solid pellets
- Color (SDS)
- Colorless
- Insoluble in (SDS)
- Water
- Item Number
- Odor (SDS)
- Ester like
- Other Hazards
- Do not breathe dust, This substance is not considered to be persistent, bioaccumulating nor toxic (PBT), This substance is not considered to be very persistent nor very bioaccumulating (vPvB).
- USA/DOT UN Number
- Not Applicable
- Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 12.0 mo mo - Physical Properties
Value Units Test Method / Conditions Glass Transition Temperature (Tg) 34.0-38.0 °C °C Softening Point 90.0-100.0 °C °C Storage Temperature 41.0-58.0 °F °F Viscosity 12.0-17.0 mPa.s mPa.s at 20°C, 20% in ETAc - Material Composition
Value Units Test Method / Conditions Solid Content min. 99.0 % %