Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Function
- Reactive Diluent
- Product Code
- MITM00363
- Single Ingredient
- Yes
- Technologies
- Product Families
- Chemical Structure
Tetra- to tri- acrylate ester ratio ~ 2/1
Features & Benefits
- CASE Ingredients Features
- Labeling Claims
- Performance Highlights
EBECRYL® 180 is characterized by:
- High acrylate functionality
- Residual hydroxyl content
- Very low vapor pressure
UV/EB curable formulated products containing EBECRYL® 180 are characterized by:
- Rapid photo response
- High cross-link density
- Excellent hardness and scratch resistance
- Excellent chemical resistance
The actual properties of UV/EB cured products also depend on the selection of other formulation components such as oligomers, additives and photoinitiators.
Applications & Uses
- Coating End Applications
- Cure Method
- Ink & Toner End Applications
- Product Applications
EBECRYL® 180 is an especially useful reactive diluent in UV/EB cured coatings and inks where fast cure speed, hardness, scratch resistance and high gloss properties are required.
Properties
- Physical Form
Regulatory & Compliance
- Certifications & Compliance
- Contains any chemicals listed on Prop 65 (including impurities, residues, catalysts, monomers, and by-products and excluding heavy metals)?
Packaging & Availability
Principal Information
- Group Principal Number
- S000001
- Principal
Storage & Handling
- Storage Conditions
- Care should be taken not to expose the product to high temperature conditions, direct sunlight, ignition sources, oxidizing agents, alkalis or acids. This might cause uncontrollable polymerization of the product with the generation of heat.
- Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers. Procedures that remove or displace oxygen from the material should be avoided. Do not store this material under an oxygen free atmosphere.
- Dry air is recommended to displace material removed from the container. Wash thoroughly after handling. Keep container tightly closed. Use with adequate ventilation.
Other
- Appearance
- Clear liquid
- Appearance (SDS)
- Liquid resin
- Color (SDS)
- Clear pale yellow
- IMO/IMDG Proper Shipping Name
- Environmentally hazardous substance, liquid, N.O.S.
- IMO/IMDG Technical name (N.O.S.)
- Mixture pentaerythritol tri/t/tetraacrylate
- IMO/IMDG UN Number
- UN3082
- Item Number
- Odor (SDS)
- Acrylate
- Other Hazards
- Polymerization may occur from excessive heat ,contamination or exposure to direct sunlight , Contact with skin may cause a cross-allergic reaction in persons already sensitized to acrylates.
- TDG Canada Proper Shipping Name
- Environmentally hazardous substance, liquid, N.O.S.
- TDG Canada Technical name (N.O.S.)
- Mixture pentaerythritol tri/t/tetraacrylate
- TDG Canada UN Number
- UN3082
- USA/DOT Proper Shipping Name
- Environmentally hazardous substance, liquid, N.O.S.
- USA/DOT Technical name (N.O.S.)
- Mixture pentaerythritol tri/t/tetraacrylate
- USA/DOT UN Number
- UN3082
- Chemical Properties
Value Units Test Method / Conditions Acid Value max. 1.0 mg KOH/g Methoxyhydroquinone Content 400.0 ppm MEHQ - Physical Properties
Value Units Test Method / Conditions Density 1.18 g/mL At 25°C Flash Point min. 100.0 °C Setaflash Melting Point 25.0-40.0 °C Moisture Content max. 0.1 % Molecular Weight 352.0 g/mol tetraacrylate Molecular Weight 298.0 g/mol triacrylate Vapor Pressure max. 0.001 mm Hg At 25°C Vapor Pressure max. 0.01 mm Hg At 100°C Viscosity 400.0-1000.0 cPs At 25°C - Material Composition
Value Units Test Method / Conditions Residual Solvent Content max. 0.1 %(W/W) - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Density (SDS) 1.2 g/cm³ Flash Point (SDS) min. 100.0 °C Melting Point (SDS) 25.0-40.0 °C Viscosity (SDS) 400.0-1000.0 mPa.s Volatile Content (SDS) 0.0-0.1 %(W/W)