Products

D.E.R.® 668-20 Solid Epoxy Resin is a high molecular weight solid reaction product of epichlorohydrin and bisphenol A. D.E.R.® 668-20 Solid Epoxy Resin is designed primarily for use in one pack stoving enamels in combination with heat-reactive cross-linking agents such as amino- and phenol- formaldehyde resins. D.E.R.® 668-20 Solid Epoxy Resin may also be used as binder in ambient curing systems in combination with isocyanate cross-linkers. Finishes made from D.E.R.® 668-20 Resin are suitable for metal decoration, interior and exterior can coatings, tube and drum linings, coil primers and many other industrial applications.

WANNATE® HDI is a liquid aliphatic diisocyanate. It is a colorless or pale yellow liquid with low viscosity.

Preventol® A 12-TK 48 is for the manufacture of aqueous and solvent formulations for preservation of wood composites, wood in above-ground and in ground applications, leather, films, glues, adhesives, and metalworking fluids.

Coscat® 83 is an organobismuth compound that was specifically developed as a catalyst for two component, polyurethane systems. For soft to medium hardness systems the addition of a zinc catalyst can reduce a potential lag in final cure, yielding a stronger final cure typical of a mercury-based catalyst.

DERTOPHENE® H 150 is a light-colored and low VOC terpene phenolic resin with high softening point. Its high polarity allows specific performances when formulated with EVA copolymers: specific adhesion, thermal resistance, cohesive balance.

EPOLENE® DE-84P is an oxidized high density low molecular weight polyethylene powder with exceptional hardness and low color used in PVC lubrication and emulsifiable applications. This material provides excellent lubrication for rigid PVC processing, providing an anti-sticking effect and efficient die lubrication. EPOLENE® DE-84P polymer has high thermal stability and tolerates higher processing temperatures without die build-up. It performs well in high-speed buffable floor finish emulsions, and provides excellent scuff and rub resistance for inks and coating applications.

CARPOL® PGP-4025 is a propylene glycol-initiated polyether polyol. The resulting material has a functionality of two and an average molecular weight of 4000 Da. This diol is polymerized with propylene oxide and then capped with 25% ethylene oxide. The outcome is a polyol with enhanced reactivity when compared to its counterpart CARPOL® PGP-4000. Main applications include C.A.S.E., however, CARPOL® PGP-4025 may also be included as a component in other urethane products and formulations.

Wayncor™ 211 is an anti-corrosion inhibitive pigment that is very effective in solvent and water based epoxy primers. It does not affect the pot life of 2K systems. It can also be used alone or as a synergist with Zinc Phosphate. Typical use level is between 3 - 7 % total formula weight.

D.E.N.® 425 is a liquid reaction product of epichlorohydrin and phenol-formaldehyde novolac. D.E.N.® 425 Epoxy Novolac Resin is an epoxidized phenolic resin of higher functionality than standard bisphenol Abased liquid epoxy resins. Epoxy novolac resins combine, in one molecule, the thermal stability of a phenolic backbone with the reactivity and versatility of an epoxy. They are distinguished by particular good thermal stability, mechanical strength and resistance against chemicals. They find ready acceptance for lining pipelines, storage tanks and pumps. D.E.N.® 425 Epoxy Novolac Resin has been developed to fill the gap between the two functional standard bisphenol F based liquid epoxy resins and the high viscous epoxy novolac resins. It has a viscosity similar to a standard bisphenol A based liquid epoxy resin. The multi-functionality, ± 2.5 epoxy groups per mole, of D.E.N.® 425 Epoxy Novolac Resin produces a more tightly cross-linked cured system than bisphenol A based liquid epoxy resins having improved high temperature performance and improved resistance against various chemical.

REAFREE® 6694 is a binder and resin used in powder coating applications.

CARPOL® GP-5015 is a glycerin-initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 5000 Da. This triol is polymerized with propylene oxide and then capped with 15% ethylene oxide. The outcome is a polyol with enhanced reactivity. Main applications include C.A.S.E., however, CARPOL® GP-5015 may also be included as a component in other urethane products and applications.

D.E.R.® 322 liquid epoxy resin is a reaction product of epichlorohydrin and bisphenol a modified with an aromatic mono-functional reactive diluent.

CRAYVALLAC® SLX is a high performance micronised amide wax rheology modifier designed for the low temperature manufacture of moisture curing methoxysilane systems, where processing temperatures typically lie within the range 60 - 90°C. CRAYVALLAC® SLX particles are converted to an interacting network of crystalline fibres. It is this network that gives rise to the shear thinning rheology. This shear thinning characteristic provides for a low viscosity at the shear rates associated with application by extrusion, and a very high viscosity under the low shear rates experienced after application. The net result is ease of application followed by excellent sag and slump resistance.

COMFORTSIL ECOSOFT E4 is a medium to low viscosity diamino functionalised polydimethyl siloxane, specially developed for formulation to emulsions for textile softening and textile resin plasticising.

Wayncor™ 219 is a zinc aluminum orthophosphate hydrate. It is a free flowing white powder intended for the use in anti-corrosion primer applications. Its pH allows it to be formulated into a wide range of formulas but is particularly effective in solvent systems and water based epoxies. Typical use levels range between 2 - 7% total formula weight.