Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Chemical Name
- Composite Materials Functions
- Function
- Binder, Binders & Matrix Materials, Resins
- Product Code
- MITM03898
- Single Ingredient
- Yes
- Synonyms
- 2-Ethyl-4-methylimidazole-E-51 copolymer, 2,2-Bis(4-glycidyloxyphenyl)propane homopolymer, 2,2-Bis(p-hydroxyphenyl)propane diglycidyl ether polymer, 2,2-Bis[p-(2,3-epoxypropoxy)phenyl]propane polymer, Biphenol A diglycidyl ether polymer, Bisphenol A diglycidyl ether homopolymer, Bisphenol A diglycidyl ether polymer, Bisphenol A diglycidyl ether resin, Bisphenol A diglycidyl ether-imidazole copolymer, Bisphenol A diglycidyl ether-piperidine copolymer, Bisphenol A diglycidyl ether-piperidine polymer, Bisphenol A diglycidyl ether-tributylethylphosphonium diethyl phosphate copolymer, Bisphenol A diglycidyl polyether, Diglycidyl bisphenol A homopolymer, Diglycidyl bisphenol A resin, Diglycidyl ether bisphenol A homopolymer, Diphenylolpropane diglycidyl ether homopolymer, N,N-Dimethylbenzylamine-bisphenol A diglycidyl ether copolymer, Poly(bisphenol A diglycidyl ether), Poly(diphenylolpropane diglycidyl ether), Poly[2,2-bis[4-(glycidyloxy)phenyl]propane]
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Materials Features
- Additional Information
- D.E.R.® 322 Liquid Epoxy Resin is diluted standard bisphenol A based liquid epoxy resin of low viscosity.
- The low viscosity is advantageous in compositions containing large amounts of filler. D.E.R.® 322 Resin has a cure rate similar to unmodified bisphenol A based liquid epoxy resins.
- The reactive diluent contained in D.E.R.® 322 Epoxy Resin limits somewhat the solvent resistance, however, an improved acid resistance can be observed using D.E.R.® 322 Epoxy Resin instead of D.E.R.® 322 Liquid Epoxy Resin.
- D.E.R.® 322 Liquid Epoxy Resin exhibits a very low tendency to crystallize.
- D.E.R.® 322 Epoxy Resin can be hot or cold cured by blending with polyamine, polyamide and modified versions of these.
- Elevated temperature cures are necessary and post-cures required to develop full end properties if anhydride or catalytic curing agents are employed.
Applications & Uses
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S002520
- Principal
Other
- Color (SDS)
- Colorless to yellow
- IATA/ICAO Proper Shipping Name
- Environmentally hazardous substance, liquid, N.O.S. (epoxy resin)
- IATA/ICAO UN Number
- UN 3082
- IMO/IMDG Proper Shipping Name
- Environmentally hazardous substance, liquid, N.O.S. (epoxy resin)
- IMO/IMDG UN Number
- UN 3082
- Insoluble in (SDS)
- Water
- Item Number
- Odor (SDS)
- Mild phenolic
- Protect from Freezing
- Yes
- Temperature Control
- Yes
- USA/DOT UN Number
- Not Applicable
- Chemical Properties
Value Units Test Method / Conditions Equivalent Weight 183.0-193.0 g/eq g/eq ASTM D1652 - Physical Properties
Value Units Test Method / Conditions Density 1.15 g/cm³ g/cm³ ASTM D4052 at 25°C Storage Temperature 32.0-109.4 °F °F Viscosity 5500.0-8500.0 mPa.s mPa.s ASTM D445 at 25°C - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) min. 100.0 °C °C Decomposition Temperature (SDS) min. 320.0 °C °C Flash Point (SDS) min. 121.0 °C °C ASTM D93 at 1atm Flash Point (SDS) min. 121.0 °C °C Pensky-Martens Closed Cup (PMCC) at 101.3kPa Kinematic Viscosity (SDS) 6567.0 cSt cSt ASTM D445 at 25°C Specific Gravity (SDS) min. 1.02 - at 25°C, Water = 1 Vapor Pressure (SDS) max. 0.01 atm atm at 25°C - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 24.0 mo mo