Products

EBECRYL® 244 is an aliphatic urethane diacrylate diluted 10% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDDA) (1). EBECRYL® 244 exhibits light color and good cure response. Films of EBECRYL® 244 cured by ultraviolet light (UV) or an electron beam (EB) demonstrate good flexibility, toughness, abrasion and water resistance, and are resistant to yellowing.

Rilsan® D30 NATURAL are specialty polyamide powders obtained from renewable resources. Rilsan® D30 NATURAL is used as additive in paint formulations to provide excellent scratch and abrasion resistance and a desired structural effect in a wide range of liquid systems, both water-borne and solvent-borne.

KRONOS® 2310 (US) for outstanding optical properties and very high weather resistance in coatings.

ZINCUM SW 2309 is in low bulk density, fine white powder.

D.E.R.® 333 is a highly reactive liquid resin intermediate of the epichlorohydrin-bisphenol a type diluted by xylene.

TAMOL® 731 DP is a dispersant used in the production of latex paints.

Staybelite® Ester 5 rosin is the glycerol ester of partially hydrogenated gum rosin, specially processed for superior taste and odour characteristics. It is a pale, thermoplastic rosin with excellent resistance to oxidation and discoloration. Its principal use is in chewing gum bases where it imparts masticatory properties in combination with polymers and other ingredients. The oxidation resistance of Staybelite Ester 5 resin helps finished chewing gums retain chewability, consistency and flavour throughout their shelf lives.

H.B. Fuller® PD-0128 is a binder and resin with excellent scrub resistance, used in waterborne adhesives for adhesives, sealants, and architectural coatings.

TEGO® Foamex 845 is an effective defoamer emulsion based on polyether siloxane technology. It provides an additional foam break-down effect.

LIPOTIN® A is a wetting and dispersing additive based on soya lecithin for waterborne formulations. It helps the wetting of the pigments and gives additional stabilization.

TEGO® Res 1100 is a deinking co-binder for solvent-borne systems allowing fast deinking of inks under alkaline conditions.

CYMEL® U-93-210 Resin is an n-butylated urea formaldehyde resin supplied in a mixture of n-butanol and xylene. It has excellent compatibility with epoxy resins and is recommended in primer formulations which are to be topcoated and rebaked.

TEGO® AIREX 991 shows very strong defoaming against both macro- and micro foam in solvent borne and high solids coatings. Especially for spray- applied coatings. TEGO® AIREX 990 is a highly compatible dearator concentrate that shows very high effectiveness in solvent borne and high solids coatings. Very suitable for clear coats.

EBECRYL® 7110 is an acrylated amine primarily used as a hydrogen donor, or photoactivator, in ultraviolet light (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. benzophenone), EBECRYL® 7110provides rapid UV cure response in air by mitigating the effects of oxygen inhibition at the coating or ink surface. Unlike conventional tertiary amines such as N-methyldiethanolamine, EBECRYL® 7110 reacts to become part of the UV cured polymer, resulting in lower residual odor and improved moisture resistance. EBECRYL® 7110 also promotes adhesion to plastic substrates and lowers viscosity when used as a primary component in UV adhesives and coatings.

3M™ Boron Nitride Cooling Filler Flakes 200-15 is a versatile ceramic material offering thermal conductivity, temperature stability, chemical resistance, high reflectivity, lightweighting and electrical insulation. The structure of layered hexagonal plates provides outstanding lubricating properties and is non-abrasive to tooling.