Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Chemical Name
- Cleaning Ingredients Functions
- Industrial Additives Functions
- Plastics & Elastomers Functions
- Product Code
- MITM15778
- Single Ingredient
- Yes
- Synonyms
- Dibasic Zinc Stearate, Zinc Distearate, Zinc Salt Of Stearic Acid
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Materials Features
- Key Features
- Zincum SW 2309 is produced from a very high quality fatty acid for applications where fine powdered processing aid is required, such as rubber dusting, in coatings, pigment dispersion or mold release for thermoplastic and thermoset resins.
- Product Performance
- The fine particle size provides excellent lubrication and mold release properties in expandable polystyrene and other resin molding applications and excellent and surface quality in thermosets
- Provides very effective acid catalyst neutralization in polyolefins.
- Consistent physical properties provide good blending and dispersion properties with a large variety of materials.
- Relatively high surface area and very fine particle size provides exceptional coating power and excellent pigment dispersion properties.
Applications & Uses
- Adhesive & Sealant End Applications
- Compatible Polymers & Resins
- Home Care Applications
- I&I Cleaning Applications
- Industrial Additives End Use
- Markets
- Applications
Properties
- Physical Form
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S002958
- Principal
Storage & Handling
- Storage Conditions
- Storage in dry areas at normal ambient temperatures is recommended.
- Open containers of unused product should be firmly closed for storage.
Other
- Appearance
- Fine white powder
- Appearance (SDS)
- Powder
- Color (SDS)
- Off - white
- Flammable Nature (SDS)
- Combustible solids
- Item Number
- Odor (SDS)
- Slight
- Other Hazards
- Dust can form an explosive mixture in air
- USA/DOT UN Number
- Not Applicable
- Chemical Properties
Value Units Test Method / Conditions Assay 13.7 % % as zinc oxide - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 0.0 d d - Physical Properties
Value Units Test Method / Conditions Bulk Density 15.0 lb/ft³ lb/ft³ Melting Point 122.0 °C °C Moisture Content 0.2 % % Sieve Fractionation (Through) 99.5 % % -325 Mesh - Material Composition
Value Units Test Method / Conditions Free Fatty Acids Content 0.2 % % - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Density (SDS) 1.1 g/cm³ g/cm³ Flash Point (SDS) min. 100.0 °C °C Log Partition Coefficient (Log Pow) (SDS) 1.2 - OECD 107 Melting Point (SDS) 120.0-122.0 °C °C Kofler Hot Bar Melting Point (SDS) 120.0-122.0 °C °C OECD 102 Solubility In Water (SDS) 0.9 mg/L mg/L OECD 105 at 20°C pH (SDS) 8.0-10.0 - at 20°C