Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Chemical Name
- Food Ingredients Functions
- Product Code
- MITM16498
- Single Ingredient
- Yes
- Synonyms
- Glycerol ester of partially hydrogenated wood rosin, Hydrogenated rosin glycerides
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Food Ingredients Features
- Labeling Claims
Applications & Uses
- Base Chemicals End Uses
- Coating End Applications
- Food & Nutrition Applications
- Personal Hygiene Applications
- Markets
- Applications
- Usage Information
- Plasticizer and softener in chewing gum base
- Component of cosmetics, depilatory waxes and other personal care products
- Resin modifier for film formers, elastomers and waxes
- Resin modifier in protective coating compositions
- Tackifier resin in adhesives where low odour is desirable
Properties
- Physical Form
Regulatory & Compliance
- Quality Standards
Principal Information
- Group Principal Number
- S002297
- Principal
Storage & Handling
- Storage Information
- Stability of about 12 months in standard storage conditions, sheltered and temperature-controlled (<25°C).
- No stacking of pallets.
- Remove the plastic film protection from the pallet once correctly stored.
- As this product is sensitive to gradual oxidation and to compaction, appropriate storage and a strict inventory control is critical (oldest material used first) especially during hot periods.
- Over time, storage at higher temperature and pressure (from stacking pallets) will accelerate re-massing of this product.
Other
- ADR/RID/ADN Hazard Identification Number
- 99
- ADR/RID/ADN Proper Shipping Name
- Elevated temperature liquid, N.O.S. (glycerol esters of hydrogenated rosin)
- ADR/RID/ADN UN Number
- UN3257
- Color (SDS)
- Yellow slightly amber colored
- Explosive Nature (SDS)
- Non explosive
- Flammable Nature (SDS)
- Non flammable
- Item Number
- Odor (SDS)
- Pine
- Other Hazards
- Resin dust may ignite on contact with electrostatic discharge or exposure to flame or other sources of ignition. Hot molten product: may burn if ignited, Fine particles and powder may cause eye irritation by mechanical abrasion. However, based on available data, the classification criteria are not met, Inhalation (dust or vapours/fumes generated by heated products) may cause respiratory irritation with throat discomfort, coughing or breathing difficulty, Fine particles and powder may cause skin irritation by mechanical abrasion. However, based on available data, the classification criteria are not met, Hot molten product: Burns may cause irreversible eye injury and blindness. Causes skin burns
- Oxidizing Properties (SDS)
- Non-oxidising
- Protect from Freezing
- No
- USA/DOT UN Number
- Not Applicable
- Optical Properties
Value Units Test Method / Conditions Color Scale 6.0 Gardner Gardner 50 red/ 50 tolerance - Chemical Properties
Value Units Test Method / Conditions Acid Value 8.0 mg KOH/g mg KOH/g - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 365.0 d d - Physical Properties
Value Units Test Method / Conditions Density 1.07 kg/L kg/L At 25°C Softening Point 75.0 °C °C Ring and Ball Test Storage Temperature -100.0-77.0 °F °F - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Decomposition Temperature (SDS) min. 300.0 °C °C OECD 103 Flash Point (SDS) min. 180.0 °C °C Regulation (EC) No. 440/2008, Annex, A.9 Partition coefficient n-octanol/water (SDS) 4.7-5.8 - OECD 117 at 25°C Relative Density (SDS) 1.0-1.1 - Regulation (EC) No. 440/2008, Annex, A.3 at 20°C Softening Point (SDS) 69.0-78.0 °C °C ASTM E28 Solubility In Water (SDS) max. 0.15 mg/L mg/L OECD 105 at 20°C Vapor Pressure (SDS) max. 100.0 Pa Pa Regulation (EC) No. 440/2008, Annex, A.4 at 20°C