Products

FORTEGRA® 401 is a specialty polyoxypropylene diamine modified liquid epoxy resin. FORTEGRA® 401 is designed for the use of enhancing the toughness and flexibility for epoxy systems, mainly used in epoxy adhesives and coatings products. With improved toughness and flexibility, the adhesives products can achieve better drop resistance and impact peeling resistance, as well as perform well on aging tests. While for the applications in coatings, it brings the benefits of improved adhesion and impact resistance. A wide variety of curing agents are available to cure this resin at ambient conditions. Most frequently used curing agents are aliphatic polyamines, polyamides and modified versions of these. Elevated temperature cure is necessary and post-cure required to develop full end properties if anhydride or catalytic curing agents are employed.

EBECRYL® 894 is used in radiation-curable coatings. It functions as a monomer and oligomer in CASE ingredients.

COPRO® CP-500 is a non-ionic, carboxylated styrene-butadiene copolymer latex that contains an antioxidant and is freeze-thaw stable.

EBECRYL® P116 HP is a photoinitiator used in radiation cure applications. It is compatible with wood substrates.

EBECRYL® 4849 is an aromatic urethane diacrylate diluted 15% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDDA). Films of EBECRYL® 4849 cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, toughness and abrasion resistance.

AP 8017 is a modified epoxy resin which can be used with our AP5627 hardener. The system having low surface tension which gives very good impregnation to the surface.

SharkDISPersion WX™ is a vinyl-based binder and resin used in paints and coatings.

Flexricin® P-3 is an outstanding plasticizer for polyvinyl butyral, rosin, vinysol resin and cellulose acetate butyrate resins. It also functions as a general purpose plasticizer for both nitrocellulose and ethylcellulose resin systems, and as an internal reactive plasticizer for polyurethanes.

NIGROSIN® WLF 01 is a neutral black dyestuff for ink, polishes and other applications The liquid form is available as Nigrosin W liquid

EBECRYL® 350 is a silicone diacrylate that improves slip, substrate wetting, and coating flow and leveling when used as an additive in formulations cured by ultraviolet light (UV) or electron beam (EB). Cured films containing EBECRYL® 350 will exhibit a smooth, tack free surface, with good blocking resistance. Because of its acrylate functionality, the silicone cures into the polymeric backbone, thus eliminating the migration that free silicones often display in coatings.

UCECOAT® 6570 is a 3 functional aliphatic urethane acrylate oligomer diluted with 5% water. This water dilutable urethane acrylate is particularly useful in screen inks and varnishes for water based applications, giving good water- and solvent resistance after curing by ultraviolet light (UV) or electron beam (EB).

AP 5700 B-75 is a low viscosity, reactive polyamide adduct hardener with improved compatibility for epoxy resins based Lacquers and coatings.

SharkDISPersion WX2™ is a vinyl-based binder, resin, and cobinder that offers antibacterial and anti-static properties, improved formulation latitude and performance, UV resistance, and water resistance.

Pale 1000 Blown Castor Oil commonly known as blown oils have increasing viscosities resulting from oxidative and crosslink polymerization at the double bonds and hydroxyl groups. Oxidative polymerization of castor oil yields products with increased viscosities and decreasing solubility in aliphatic solvents, increasing compatibility with various resins and improved ability to wet and disperse pigments while imparting solvent and abrasion resistance to lacquer systems. The polymerized oils are used to plasticize a variety of resins in adhesive and sealant systems, inks and hot melts. The heavier viscosity polymerized oils are processing aids and plasticizers for rubber polymers, imparting oil and solvent resistance.

Synthomer ADS H190 is a medium to high molecular weight, solid polyvinyl acetate. It is and adhesives or met designed for use in solvent based coatings, inks extrusion systems. profile additive in Synthomer ADS H190 can also be used as a low unsaturated polyester processes. composites, typically pultrusion and BMC processses