Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Product Code
- MITM14212
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Product Performance
UCECOAT® 6570 is characterized by:
- Low color
- High viscosity
UV/EB cured products based on UCECOAT® 6570 are characterized by the following performance properties:
- Good water- and solvent resistance
- Fast curing
- Low MeHQ level
The actual properties of UV/EB cured products also depend on the selection of the other formulation components, such as reactive diluent(s), additives and photo initiators.
Applications & Uses
- Application Method
- Coating End Applications
- Cure Method
- Ink & Toner End Applications
- Markets
- Applications
- Product Applications
Formulated UV/EB curable products containing UCECOAT® 6570 may be applied by lithographic, screen, gravure, direct or reverse roll, and curtain coating methods.
UCECOAT® 6570 is recommended for use in:
- Screen inks
- Waterbased applications
Properties
- Physical Form
- Soluble In
Technical Details & Test Data
- Viscosity Reduction
UCECOAT® 6570 can be diluted with reactive monomers such as tripropyleneglycol diacrylate (TPGDA)(1). The specific reactive diluent(s) used will influence performance properties such as hardness and flexibility. (1) product of allnex.
Safety & Health
- Safety Information
The toxicological properties of this material have not been fully determined. Products of this type can be expected to be eye and skin irritant and have the potential to cause sensitization or other allergic responses. Appropriate precautions should be taken to avoid eye and skin contact and to avoid inhalation of the aerosols or vapours. Consult the relevant Safety Data Sheet for appropriate handling procedures and protective equipment prior to using this or any other material referred to in this bulletin.
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S000001
- Principal
Storage & Handling
- Storage Conditions
- Care should be taken not to expose radiation curable products to temperatures exceeding 40°C for prolonged periods or to direct sunlight. This might cause uncontrollable polymerization of the product with generation of heat.
- Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers. Do not store this material under an oxygen free atmosphere. Use dry air to displace material removed from the container. This material should not be stored for more than 2 years.
Other
- Appearance (SDS)
- Liquid
- Color (SDS)
- Clear colorless to light yellow
- Item Number
- Odor (SDS)
- Ester acrylate
- Other Hazards
- Polymerization may occur from excessive heat , contamination or exposure to direct sunlight .Contact with skin may cause a cross-allergic reaction in persons already sensitized to acrylates.
- Oxidizing Properties (SDS)
- None
- USA/DOT UN Number
- Not Applicable
- Optical Properties
Value Units Test Method / Conditions Color Scale max. 2.0 Gardner Gardner - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 2.0 yr yr - Physical Properties
Value Units Test Method / Conditions Density 1.1 g/cm³ g/cm³ At 25°C Viscosity 6000.0 mPa.s mPa.s At 60°C - Material Composition
Value Units Test Method / Conditions Polymer Solid Content 95.0 %(W/W) %(W/W) - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) min. 100.0 °C °C Flash Point (SDS) min. 100.0 °C °C Cleveland Open Cup Specific Gravity (SDS) 1.1 - Vapor Pressure (SDS) max. 1.33 hPa hPa At 20°C Viscosity (SDS) 4000.0-8000.0 mPa.s mPa.s at 60°C, very highly viscous liquid Volatile Content (SDS) 5.0 %(W/W) %(W/W)