Products

CRAYVALLAC® PA4 BA 20 is a HAPs-free rheology modifier pre-activated amide wax supplied in a mixture of butyl acetate and alcohol. It is a rheology modifier in paste form with enhanced transparency, excellent anti-sagging and anti-settling properties.CRAYVALLAC® PA4 BA 20 is supplied in the form of crystalline fibres. In a coating system, these fibres form an interacting network. This network gives rise to the shear thinning rheology of the final coating. This shear thinning characteristic provides a very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application.

AP 5805 is an undiluted clear bifunctional liquid epoxy resin produced from bisphenol A and epichlorohydrin.

MAINCOTE™ AEH-10 is a waterborne dispersion of an acrylic-epoxy hybrid polymer designed for high performance two-component coatings useful in residential, commercial and industrial coatings applications. The unique acrylic-epoxy hybrid technology facilitates the formulation of low VOC coatings with long pot-life, fast dry and hardness development, and excellent durability properties including resistance to chemicals, solvents and weathering. Versatility in the selection of curing agent allows the formulation of coatings with a range of properties. MAINCOTE AEH-10 Resin is an epoxy-functional material that can be crosslinked with typical epoxy hardeners, including amine-based hardeners and acid-functional crosslinkers such as acrylic latexes. The ease of formulation and excellent balance of properties facilitated by MAINCOTE AEH-10 Resin make it an excellent choice for coatings used in a variety of residential, commercial and industrial applications.

EBECRYL® 4683 is an unsaturated aliphatic urethane acrylate that is used in the formulation of UV-curing and electron beam-curing coatings on metal substrates.

ROPAQUE™ ULTRA Opaque Polymer is a pigment used in architectural coatings, automotive OEM coatings, and industrial coatings.

Bluesil™ RES 6405X is 50% solids methylphenylsilicone resins in Xylene solution (6405X). These resins are ideal for the formulation of heat resistant coatings for industrial applications with improved weatherability.

RHOBARR™ 110 is acrylic barrier coating emulsion for paper and paperboard applications

HP7109 is a high solids, high silicone content resin for producing coatings with excellent heat resistance and excellent gloss. Low color allows it to be used in either clear or pigmented films. Curing at 275°C for 5 minutes yields a film with excellent MEK resistance.

Licowax® PE 130 granules is a high density polyethylene wax.

SILIKOFTAL® HTF MPA/MBA is a methoxy-functional silicone polyester resin

TAMOL® 963 35% is a versatile, low-cost, non-foaming, water-soluble polyacid dispersant which offers excellent performance in a wide range of latex paint formulations. It is recommended for low sheen flat through semi-gloss acrylic, stirene-acrylic and vinyl acrylic formulations and is effective over a pH range of 7-11 with a wide temperature range.

EBECRYL® 85 is a low viscosity amine modified polyether acrylate that provides high reactivity in low extractable, low odor energy curable coatings and inks. Coatings and inks based on EBECRYL® 85 exhibit a low odor after UV or EB curing.

CRAYVALLAC® PA3 WDA 20 is a pre-activated amide wax supplied in a mixture of mineral spirit (D60) and alcohols. Under paste form for post-addition to solvent-based low polarity coating systems, it provides a shear-thinning rheology with thixotropic viscosity recovery to coating formulations. In coating systems, its crystalline fibres form an interacting network which gives rise to the shear-thinning rheology of the final coating. It provides a very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application. Immediately following application, the coating’s viscosity undergoes a time dependent recovery as the network re-establishes itself. This time dependence is known as thixotropy and enables the final coating to attain very good levelling.

EBECRYL® LEO 10101 is a self-curing multifunctional acrylate enabling the UV curing of printing inks and coatings, not requiring additional photoinitiator, which reduces the risk of migration in indirect food contact applications. EBECRYL® LEO 10101 is specifically developed for making high reactive flexo inks with good flow and low migration. EBECRYL® LEO 10101 can be used for different colors also for white. It is recommended to use 20-30% EBECRYL® LEO 10101 in an ink or coating to reach a correct surface and through cure.

3M™ Glass Bubbles S38 is specially formulated for a high strength-to-weight ratio. This allows greater survivability under many demanding processing conditions, such as injection molding. They also produce stable voids, which results in low thermal conductivity and a low dielectric constant. 3M glass bubbles are available in a variety of sizes and grades to help you meet your product and processing requirements.