Enhanced TDS
Identification & Functionality
- CASE Ingredients Functions
- Carrier
- Chemical Family
- Country of Origin
- Function
- Rheology Modifier
- Product Code
- MITM01581
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Labeling Claims
- Key Benefits
- Formulation
Ready to use
Easy handling
Post addition
- Storage
Antisettling
In-can appearence
Syneresis resistance
Viscosity stability
- Film Properties
Gloss
Anticorrosion
Levelling
- Safer Solutions
APEO Free
Heavy Metal Free
Applications & Uses
- Coating End Applications
- Markets
- Applications
- Product Applications
- Edge-coverage
- Sag resistance
- Sprayability
- Processing Information
- In order to obtain the maximum efficiency from CRAYVALLAC® PA4 BA 20, it is necessary to disperse this product without destroying the crystalline fibres.
- It is therefore preferable to incorporate CRAYVALLAC® PA4 BA 20 under low to medium shear conditions over as short a time period as possible.
- When using a high-speed disperser, it is recommended that CRAYVALLAC® PA4 BA 20 be added during the final stages of production, when the coating has been partially thinned to a viscosity of 600-800 mPa.s (ICI cone and plate at 10000s-1) and the peripheral speed reduced to approximately 4 ms-1.
- Too high a speed results in destruction of the active fibres and reduced performance, whereas, too low a speed will result in extended incorporation times.
- In general, the time required for incorporation should be kept to a minimum in order to minimise damage due to overshear.
Properties
- Physical Form
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Contains any chemicals listed on Prop 65 (including impurities, residues, catalysts, monomers, and by-products and excluding heavy metals)?
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S000003
- Principal
Storage & Handling
- Storage Conditions
- It should be stored in the original containers in a dry place at temperatures between 5°C (41°F) and 30°C (86°F).
- Avoid exposure to direct sunlight or frost.
- In these conditions, this product should be used within 24 months from production.
Other
- Appearance
- Off white paste
- Color (SDS)
- Light yellow
- IMO/IMDG Proper Shipping Name
- Solids containing flammable liquid, N.O.S. (butyl acetate, ethanol)
- IMO/IMDG Technical name (N.O.S.)
- butyl acetate, ethanol
- IMO/IMDG UN Number
- UN3175
- Insoluble in (SDS)
- Water
- Item Number
- Odor (SDS)
- Fruity
- Other Hazards
- Dried product may stick to the skin causing irritation upon removal.
- TDG Canada Proper Shipping Name
- Solids containing flammable liquid, N.O.S. (n-butyl acetate, ethanol)
- TDG Canada Technical name (N.O.S.)
- n-butyl acetate, ethanol
- TDG Canada UN Number
- UN3175
- USA/DOT UN Number
- Not Applicable
- Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 24.0 mo - Physical Properties
Value Units Test Method / Conditions Specific Gravity 0.86 - Storage Temperature 41.0-86.0 °F - Material Composition
Value Units Test Method / Conditions Active Content 20.0 % Solid Content 20.0 % - Application Information
Value Units Test Method / Conditions Dosage (Use Level) 0.5-5.0 % - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Burning Rate (SDS) 50.0 mm/s Wetted Zone Does Not Stop Fire Density (SDS) 0.86 g/cm³ at 20°C Specific Gravity (SDS) 0.86 - Water = 1, liquid Vapor Density (SDS) 4.0 kg/m³ at 20⁰C, n-Butyl acetate =1 Vapor Pressure (SDS) 8.0 mm Hg at 20⁰C, n-Butyl acetate =1