Products

PARALOID™ A-21 100% Resin imparts excellent intercoat adhesion, hardness, and outdoor durability. It has the same composition and characteristics as the solution grade, while providing wider formulating latitude.

Thetawet™ FS-8150 is a nonionic surfactant used in caulks, home care applications such as bottle wash, degreasers, floor cleaners, and household cleaners, as well as in industrial and institutional cleaning including bottle wash, degreasers, and industrial cleaners.

MAINCOTE™ 4950 Resin is an aqueous acrylic emulsion polymer that facilitates the formulation of coatings to less than or equal to 50 g/L VOC for use in light to medium duty maintenance and protective coatings applications and general industrial metal finishing applications. It offers excellent exterior durability and corrosion resistance, and ease of formulation with excellent paint stability. MAINCOTE 4950 Resin offers improved corrosion resistance versus current direct-to-metal (DTM) finish coats formulated below 100 g/L. It also offers good architectural gloss and trim paint properties. Low coalescent demand allows compliance with stringent VOC regulations.

D.E.H.® 581 curing agent is a low viscosity amine hardener for epoxy resins. It is a fast curing hardener and offers good low temperature cure. It results in a blush-free product and has good water spot resistance and excellent chemical resistance to acids and solvents. It can also be used as an accelerator for other hardeners in coatings and civil engineering.

CYMEL® 1172 resin is an unalkylated glycoluril crosslinker supplied in water at 45% solids. It is designed to be used for crosslinking aqueous neutral or acidic hydroxyl or amide functional polymers and combines excellent stability at acidic pH (as low as 4) with excellent reactivity. CYMEL® 1172 resin cannot be used in amine neutralized or basic coating systems because of the potential problems of demethylolation of the compound and a significant decrease in cure response.

NuTone® 324 is a low structure utility pigment black that is broadly applicable in a variety of inks. It is especially recommended for water-based flexo. NuTone® 324 has a unique combination of surface area and structure especially suited for good covering power and color strength.

AP 5604 is a low viscosity, Long Pot-life, modified aliphatic amine hardener for epoxy resins based coatings. Suitable for high solids or solvent free coatings.

EBECRYL® 286 is an aliphatic urethane diacrylate oligomer diluted 25% with tripropylene glycol diacrylate (TPGDA) monomer. Films of EBECRYL® 286 cured by ultraviolet light (UV) or electron beam (EB) exhibit excellent exterior durability, toughness, and flexibility, as well as the non-yellowing properties typical of an aliphatic urethane.

CARPOL® NIONIC™ L-64 is a polyalkylene glycol used as a nonionic surfactant in industrial and industrial coatings applications.

SIPERNAT® 26 Coating is a specially engineered precipitated silica that functions as a conditioning agent and carrier. It can be used to improve flow behavior and storage stability of powdered materials, and it may impart rheological and matting benefits to liquid coatings.

Bayferrox® 7009 is an inorganic pigment categorized under the chemical family of chemical mixtures and blends.

EBECRYL® 1200 is an acrylate functional acrylic resin supplied in 45% by weight of butyl acetate. Upon evaporation of the solvent, films of EBECRYL® 1200 are physically dry and tack-free and after UV/EB curing are hard and chemical resistant without embrittlement. The viscosity and cured properties can be adjusted with the addition of reactive diluents such as 1,6-hexanediol diacrylate (HDDA), isobornyl acrylate (IBOA), trimethylolpropane triacrylate (TMPTA), and tripropylene glycol diacrylate (TPGDA). A suitable photoinitiator must be added for polymerization with UV energy

P-™10 Acid Low color castor oil fatty acids is castor oil fatty acids, derived from pure castor oil. P-™10 Acid Low color castor oil fatty acids is the building block for modifying many performance properties of a broad range of industrial chemicals. These performance enhanced chemicals are then used in a variety of consumer products, including paints, adhesives, soaps and inks.

BONDINE® TX8030 is a random ethylene-ethyl acrylate-maleic anhydride terpolymer.