Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Function
- Binder
- Product Code
- MITM10789
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Performance Highlights
EBECRYL® 1200 is characterized by:
- Moderate viscosity
- Light color
- Physically dry after solvent evaporation
UV/EB cured products containing EBECRYL® 1200 are characterized by the following performance properties:
- Excellent chemical and stain resistance
- Good adhesion, especially for wood
- Non-yellowing
Applications & Uses
- Compatible Substrates & Surfaces
- Cure Method
- Markets
- Applications
Properties
- Physical Form
- Notes
¹ - EB cured, 50 kGy (5 Mrad), 250 keV, 75 μm free film
Regulatory & Compliance
- Certifications & Compliance
- Contains any chemicals listed on Prop 65 (including impurities, residues, catalysts, monomers, and by-products and excluding heavy metals)?
Packaging & Availability
Principal Information
- Group Principal Number
- S000001
- Principal
Storage & Handling
- Storage and Handling Conditions
Care should be taken not to expose the product to high temperature conditions, direct sunlight, ignition sources, oxidizing agents, alkalis or acids. This might cause uncontrollable polymerization of the product with the generation of heat. Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers. Procedures that remove or displace oxygen from the material should be avoided. Do not store this material under an oxygen free atmosphere. Dry air is recommended to displace material removed from the container. Wash thoroughly after handling. Keep container tightly closed. Use with adequate ventilation.
Other
- Appearance
- Clear liquid
- Appearance (SDS)
- Clear liquid
- Color (SDS)
- Yellowish
- IATA/ICAO Proper Shipping Name
- Resin solution
- IATA/ICAO UN Number
- UN1866
- IMO/IMDG Proper Shipping Name
- Resin solution
- IMO/IMDG UN Number
- UN1866
- Insoluble in (SDS)
- Water
- Item Number
- Odor (SDS)
- Ester
- Other Hazards
- Polymerization may occur from excessive heat ,contamination or exposure to direct sunlight , Contact with skin may cause a cross-allergic reaction in persons already sensitized to acrylates.
- TDG Canada Proper Shipping Name
- Resin solution
- TDG Canada UN Number
- UN1866
- USA/DOT Proper Shipping Name
- Resin solution
- USA/DOT UN Number
- UN1866
- Optical Properties
Value Units Test Method / Conditions Color Scale max. 2.0 ASTM ASTM D1500 Color Scale max. 2.0 Gardner Gardner Color Scale - Chemical Properties
Value Units Test Method / Conditions Acid Value max. 10.0 mg KOH/g Epoxy Group Content max. 0.64 % Hydroxyl Value max. 200.0 mg KOH/g Solids - Mechanical Properties
Value Units Test Method / Conditions Elongation 0.4 % at Break Tensile Modulus 341910.0 psi Tensile Strength 1421.0 psi - Physical Properties
Value Units Test Method / Conditions Density 1.07 g/mL At 20°C Flash Point 135.0 °C Pensky-Martens Closed Cup (PMCC) Glass Transition Temperature (Tg) max. 115.0 °C Dynamic Mechanical Analysis (DMA) tan Delta Viscosity 1500.0-4500.0 mPa.s ASTM D445 at 23°C Viscosity 1700.0 mPa.s At 25°C - Material Composition
Value Units Test Method / Conditions Non-Volatile Content 53.0-57.0 % - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) 100.0-200.0 °C Density (SDS) 1.075 g/cm³ Flash Point (SDS) 22.0 °C SetaFlash Closed Cup Vapor Pressure (SDS) max. 1.33 hPa at 20°C