Products

CARPOL® PGP-3000 is a propylene glycol-initiated polyether polyol. CARPOL® PGP-3000 has a functionality of two and an average molecular weight of 3000 Da. This diol is polymerized solely with propylene oxide for controlled reactivity.

EBECRYL® 3730-TP25 is the modified diacrylate ester of a bisphenol A based epoxy resin diluted 25% by weight with the reactive diluent tripropylene glycol diacrylate (TPGDA)(1). It is designed primarily for use in ultraviolet light (UV) or electron beam (EB) curable formulations. EBECRYL® 3730-TP25 is light in color with high UV/EB reactivity, and exhibits good wetting of pigments, matting agents and substrates compared to unmodified epoxy acrylates. Cured films based on EBECRYL® 3730-TP25 will typically demonstrate high gloss and hardness, and good chemical resistance.

DERMULSENE® DP 1601 is an aqueous, solvent free resin based on stabilized rosin ester.

RHOBARR™ 325 is an aqueous acid-modified dispersion intended for paper barrier coating applications. RHOBARR™ 325 Barrier DISPersion has been designed for use in formulations targeted for paper barrier coating applications. This base dispersion can be formulated with rheology modifiers, waxes and other components as required, forming a resistant coating on proper thermal curing.

REAFREE® 5707 is a saturated carboxylated polyester for combination with Triglycidylisocyanurate or with ß-Hydroxyalkylamide type hardeners. Suitable for the formulation of outdoor superdurable and protective thermosetting powders. TMA free type.

AP 5986 is low viscosity, benzyl alcohol and nonyl phenol free modified cycloaliphatic amine hardener for epoxy resin based coatings.

D.E.R.® 750 Liquid Epoxy Resin is a di-functional reactive diluent modified reaction product of epichlorohydrin with bisphenol-A.

TEGO® Cure 100 is a reactive ambient-curing siloxane resin,pre-catalyzed with amines, for the use as hardener

AP 1072 LT is a low viscosity, reactive Phenalkamine adduct hardener solution for epoxy resins based lacquers and coatings.

D.E.H.® 612 is a modified aliphatic amine hardener produced without the use of nonylphenol. It is used as an epoxy curing agent for rapid-set and low temperature cure systems and provides high gloss coatings with good blush resistance, high strength, and good chemical resistance. It can be used alone or as an accelerator for other amines.

Hostavin® 3326 disp. is a 52 % aqueous dispersion of a halogenated benzotriazole UV-absorber. It is characterized by its excellent compatibility and high efficiency in waterborne paints and varnishes, especially for protection of exterior wood coatings.

40 Oil - Polymerized Castor Oil at the double bond yields products with increased viscosities and decreasing solubility in aliphatic solvents, increasing compatibility with various resins and improved ability to wet and disperse pigments while imparting solvent and abrasion resistance to lacquer systems. The polymerized oils are used to plasticize a variety of resins in adhesive and sealant systems, inks, and hot melts. The heavier viscosity polymerized oils are processing aids and plasticizers for rubber polymers, imparting oil, and solvent resistance.

D.E.R.® 326 liquid epoxy resin is a mono-functional reactive diluent modified liquid epoxy resin that has excellent resistance to crystallization.

Bermocoll® EBM 5500 is a non-ionic, water soluble cellulose ether with enhanced enzyme resistance. It improves the consistency, the stability, and the water retention of water based products.