Products

EBECRYL® 4100 is an undiluted aliphatic urethane acrylate designed for coatings on wood, cork, furniture, paper, parquet, and film.

CARPOL® PGP-3815 is a propylene glycol-initiated polyether polyol. CARPOL® PGP-3815 has a functionality of two and an average molecular weight of 3800 Da. This diol is polymerized with propylene oxide and then capped with 15% ethylene oxide.

AP 2508 has very a low viscosity aliphatic amine hardener used in combination with epoxy resins for coatings and adhesives.

SURFYNOL® 355 is a substrate wetting agent with global food contact compliances. It is suitablefor waterborne coatings and inks.

Synthomer M60 is a medium high molecular weight, solid polyvinyl acetate. It is designed for use in solvent-based coatings, inks, and adhesives or melt extrusion systems such as automotive sound damping foils.

DzBh Baling® SBS YH-791H is a linear styrene/butadiene block copolymer.

SUKOREZ® SU-130 is a waterwhite thermoplasic resin obtained from polymerization and hydrogenation of cyclic ingredients. The major usages are tackifier for hot melt adhesive(HMA), hot melt pressure sensitivi adhesive(HMPSA) and solvent based pressure sensitive adhesive(SBPSA), because of its good heat resistance and good compatibility with base polymers such as ethylene vinyl acetate(EVA), styrene block copolymer(SBC).

Dynasylan® PTEO an alkyltrialkoxysilane is important component in sol­gel systems. Dynasylan® PTEO is a colorless, low­viscosity liquid. Dynasylan® PTEO is regarded as trifunctional since all three alkoxy groups can hydrolyze. Additionally Dynasylan® PTEO contains a propyl group that adds a hydrophobic character to the coatings. Hydrolysis leads to silanol groups which, in a subsequent condensation reaction, form very stable siloxane bonds (­Si­O­Si­). Condensation occurs parallel to hydrolysis once a certain amount of silanol groups have been formed. The absolute and relative rates of hydrolysis and condensation depend on a number of factors. The most important factors include pH, concentration, solvent, temperature and the catalyst.

DzBh Baling® YH-1209 is a linear styrene/isoprene block copolymer.

D.E.R.® 325 liquid epoxy resin is a mono-functional reactive diluent modified reaction product of epichlorohydrin with Bisphenol-A.

AP 8404 is a curing agent based on a poly(bisphenol A-co-epichlorohydrin) glycidyl end-capped structure. It is primarily used in epoxy systems to promote crosslinking and curing. This ingredient enhances the chemical resistance, mechanical properties, and thermal stability of the cured material. It is suitable for various industrial applications requiring durable and high-performance coatings and adhesives.

3M™ Boron Nitride Cooling Filler Flakes 500-15 is a engineered to improve thermal conductivity in polymers while maintaining or improving electrical insulation. Their unique properties make these additives suitable for many thermoplastic, elastomer and thermoset resins used in a wide variety of electrical and electronic applications including thermal interface materials (TIM), consumer electronics and automotive applications.

PARALOID™ A-21 100% Resin imparts excellent intercoat adhesion, hardness, and outdoor durability. It has the same composition and characteristics as the solution grade, while providing wider formulating latitude.

Hostavin® VSU powder is an Oxalanilide UV absorber, a low volatile polar substance with good heat stability. It is resistant to discoloration with metal ions, e.g. from polymerization catalyst residues, fillers or from contact surfaces. Hostavin® VSU powder absorbs the UV light especially in the UV-B range, and is therefore a stabilizer of choice for combinations with optical brighteners and for UV curing systems.